V2 (A4) Calibration Block (BS 2704) NDT Calibration Block

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our V2 (A4) Calibration Block (BS 2704), please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 304 Stainless Steel (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 304 Stainless Steel (25mm) Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 7075-T6 Aluminum (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 7075-T6 Aluminum (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block Titanium (20mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 20mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block, 1018 Steel (12.5mm) 12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. • Dimensions: 75mm x 43mm x 12.5mm • Made from titanium. • Also available in 20mm and 25mm thicknesses for calibration of non-miniature probes.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 1018 Steel (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 304 Stainless Steel (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block Titanium (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm 20mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 20mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 304 Stainless Steel (12.5mm) (7249)

V-2 Block 304 Stainless Steel (12.5mm)

25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 25mm
• Made from aluminum.
• Also available in 12.5mm and 20mm thicknesses
V-2 Calibration Block 304 Stainless Steel (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 304 Stainless Steel (25mm) (7246)

V-2 Block 304 Stainless Steel (25mm)

Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
In accordance with EN 27963, DIN 54-120, and ISO 7963.
V-2 Block 304 Stainless Steel (25mm) Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 7075-T6 Aluminum (12.5mm) (7251)

V-2 Block 7075-T6 Aluminum (12.5mm)

25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 25mm
• Made from carbon steel.
• Also available in 12.5mm and 20mm thicknesses
V-2 Calibration Block 7075-T6 Aluminum (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 7075-T6 Aluminum (25mm) (7252)

V-2 Block 7075-T6 Aluminum (25mm)

25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 25mm
• Made from stainless steel.
• Also available in 12.5mm and 20mm thicknesses
V-2 Calibration Block 7075-T6 Aluminum (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block Titanium (20mm) (7254)

V-2 Block Titanium (25mm)

20mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 20mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
  • Dimensions: 75mm x 43mm x 20.0mm
  • Made from 7075-T6 Aluminum, anodized. 
  • Also available in 12.5mm thickness.
V-2 Calibration Block Titanium (20mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 20mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block, 1018 Steel (12.5mm) (7247)

V-2 Block, 1018 Steel (12.5mm)

12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 12.5mm
• Made from titanium.
• Also available in 20mm and 25mm thicknesses for calibration of non-miniature probes.
V-2 Block, 1018 Steel (12.5mm) 12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083. • Dimensions: 75mm x 43mm x 12.5mm • Made from titanium. • Also available in 20mm and 25mm thicknesses for calibration of non-miniature probes.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 1018 Steel (25mm) (7248)

V-2 Calibration Block 1018 Steel (25mm)

25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 25mm
• Made from titanium.
• Also available in 12.5mm and 20mm thicknesses
V-2 Calibration Block 1018 Steel (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 304 Stainless Steel (7250)

V-2 Calibration Block 304 Stainless Steel (25mm)

12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
  • Dimensions: 75mm x 43mm x 12.5mm
  • Made from Type 304 Stainless Steel
  • Also available in 25mm thickness for calibration of non-miniature probes.
V-2 Calibration Block 304 Stainless Steel (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block Titanium (12.5mm) (7253)

V-2 Calibration Block Titanium (12.5mm)

20mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 20mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
  • Dimensions: 75mm x 43mm x 20.0mm
  • Made from 1018 Steel, Nickel-plated.
  • Also available in 12.5mm thickness.
V-2 Calibration Block Titanium (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm 20mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 20mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees. In accordance with EN 27963, DIN 54-120, and ISO 7963.
Per Page      1 - 10 of 10
  • 1