Phased Array "Type A" Block (IIW-Type) NDT Calibration Blocks

NDE offers Phased Array "Type A" Block (IIW-Type) Block in steel, aluminum, stainless steel, Magnesium, Copper and other alloys. Please browse our products to find the best one for you. If you have any questions about NDE and our PAUT & TOFD STANDARD BLOCKS, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 1018 Steel (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 304 Stainless Steel (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 304 Stainless Steel (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 1018 Steel (Inch Version) NDT PAUT Calibration Block (7440)

PAUT-Type A Block 1018 Steel (Inch Version)

Geometry:4.000" and 2.000" radii
19 through holes at .040" diameter
1 through hole at .080" diameter
4 FBHs at .080" diameter x .080", .160", .235" and .315" deep.
4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep.
3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius.
4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long.
Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 1018 Steel (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 304 Stainless Steel (Inch Version) NDT PAUT Calibration Block (7441)

PAUT-Type A Block 304 Stainless Steel (Inch Version)

Geometry:4.000" and 2.000" radii
19 through holes at .040" diameter
1 through hole at .080" diameter
4 FBHs at .080" diameter x .080", .160", .235" and .315" deep.
4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep.
3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius.
4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long.
Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 304 Stainless Steel (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 304 Stainless Steel (Metric Version) NDT PAUT Calibration Block (7442)

PAUT-Type A Block 304 Stainless Steel (Metric Version)

Geometry:100.0 mm and 50.0m radii
19 through holes at 1.0mm diameter
1 through hole at 2.0mm diameter
4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep
4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep
3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius
4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long.
Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 304 Stainless Steel (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7443)

PAUT-Type A Block 7075-T6 Aluminum (Inch Version)

PAUT-Type A Block 7075-T6 Aluminum (Inch Version) 
Geometry:4.000" and 2.000" radii
19 through holes at .040" diameter
1 through hole at .080" diameter
4 FBHs at .080" diameter x .080", .160", .235" and .315" deep.
4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep.
3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius.
4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long.
Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 7075-T6 Aluminum (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) NDT PAUT Calibration Block (7444)

PAUT-Type A Block 7075-T6 Aluminum (Metric Version)

Geometry:100.0 mm and 50.0m radii
19 through holes at 1.0mm diameter
1 through hole at 2.0mm diameter
4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep
4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep
3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius
4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long.
Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
Per Page      1 - 5 of 5
  • 1