PHASED ARRAY CALIBRATION BLOCK NO 3 - 3/4" Thick NDT Calibration Blocks

NDE offers PHASED ARRAY CALIBRATION BLOCK NO 3 - 3/4" Thick in steel, aluminum, stainless steel, Magnesium, Copper and other alloys. Please browse our products to find the best one for you. If you have any questions about NDE and our PAUT & TOFD STANDARD BLOCKS, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel ( ¾" Thick) NDT PAUT Calibration Block (7445)
PAUT-Phased Array calibration block 1018 Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T. This block is designed to reduce echo interference when performing a DAC/TCG calibration. The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted. A 150° angle has also been machined into the block ends to diminish corner reflections. As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6 inches.
PAUT-Phased Array calibration block 1018 Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel ( ¾" Thick) NDT PAUT Calibration Block (7446)
PAUT-Phased Array calibration block 304 Stainless Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T. This block is designed to reduce echo interference when performing a DAC/TCG calibration. The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted. A 150° angle has also been machined into the block ends to diminish corner reflections. As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6 inches.
PAUT-Phased Array calibration block 304 Stainless Steel ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) NDT PAUT Calibration Block (7447)
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T. This block is designed to reduce echo interference when performing a DAC/TCG calibration. The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted. A 150° angle has also been machined into the block ends to diminish corner reflections. As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6 inches.
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
Per Page      1 - 3 of 3
  • 1