Phased Array Calibration Block No. 2 - 3/4" Thick NDT Calibration Blocks

NDE offers Phased Array Calibration Block No. 2 - 3/4" Thick Block in steel, aluminum, stainless steel, Magnesium, Copper and other alloys. Please browse our products to find the best one for you. If you have any questions about NDE and our PAUT & TOFD STANDARD BLOCKS, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) NDT PAUT Calibration Block (7451)

PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) NDT PAUT Calibration Block (7452)

PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2-3/4" Thick) NDT PAUT Calibration Block (7453)

PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
Per Page      1 - 3 of 3
  • 1