PAUT-Phased Array calibration block 304 Stainless Steel (1½" Thick,) NDT PAUT Calibration Block

PAUT-Phased Array calibration block 304 Stainless Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
PAUT-Phased Array calibration block 304 Stainless Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
  • Availability: 69 In Stock
  • Model: 7449
  • Manufacturer: NDE Flaw Technologies Pvt Ltd (NDE TECH)

Write Review

Note: Do not use HTML in the text.