PAUT-Notch Block NDT Calibration Blocks
NDE offers PAUT Notch Block in steel, aluminum, stainless steel, Magnesium, Copper and other alloys. Please browse our products to find the best one for you. If you have any questions about NDE and our PAUT & TOFD STANDARD BLOCKS, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
PAUT-Notch Block 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7432)
Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT -Notch Block 7075-T6 Aluminum (Inch Version)
GeometryDimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT-Notch Block 7075-T6 Aluminum (Inch Version)
Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
PAUT-Notch Block, 304 Stainless Steel (Inch Version) NDT PAUT Calibration Block (7431)
Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT -Notch Block 304 Stainless Steel (Inch Version)
Geometry: The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT-Notch Block 304 Stainless Steel (Inch Version)
Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
PAUT-Notch Block, 7075-1018 Steel (Inch Version) NDT PAUT Calibration Block (7433)
Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT -Notch Block7075-1018 Steel (Inch Version)
GeometryDimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT-Notch Block7075-1018 Steel (Inch Version)
Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
- 1