PAUT Navships Test Block NDT Calibration Blocks

NDE offers PAUT Navships Test Block in steel, aluminum, stainless steel, Magnesium, Copper and other alloys. Please browse our products to find the best one for you. If you have any questions about NDE and our PAUT & TOFD STANDARD BLOCKS, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 1018 Steel (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 304 Stainless Steel (Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 304 Stainless Steel (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 1018 Steel(Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 1018 Steel (Metric Version) (7419)

PAUT-Navships Test Block 1018 Steel (Metric Version)

Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm.
Dimensions: 30mm wide x 75mm tall x 300mm long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 1018 Steel (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 304 Stainless Steel (Inch Version) (7420)

PAUT-Navships Test Block 304 Stainless Steel (Inch Version)

Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 304 Stainless Steel (Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 304 Stainless Steel (Metric Version) NDT PAUT Calibration Block (7421)

PAUT-Navships Test Block 304 Stainless Steel (Metric Version)


Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm.
Dimensions: 30mm wide x 75mm tall x 300mm long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 304 Stainless Steel (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version) (7423)

PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version)

Geometry: The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm.
Dimensions: 30mm wide x 75mm tall x 300mm long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block, 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7422)

PAUT-Navships Test Block 7075-T6 Aluminum (Inch Version)

Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships, Test Block, 1018 Steel(Inch Version) NDT PAUT Calibration Block (7418)

PAUT-Navships Test Block 1018 Steel(Inch Version)

Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 1018 Steel(Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
Per Page      1 - 6 of 6
  • 1