PAUT-AWS TYPE Phased Array Calibration Standard NDT Calibration Blocks

Sort By:  
paut aws type block 1018 steel inch version ndt paut calibration block
PAUT-AWS Type Block 1018 Steel (Inch Version) Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
paut aws type block 304 stainless steel inch version ndt paut calibration block
PAUT-AWS Type Block 304 Stainless Steel (Inch Version) Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
paut aws type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-AWS Type Block 7075-T6 Aluminum (Inch Version) Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
paut aws type block 1018 steel inch version ndt paut calibration block
PAUT-AWS Type Block 1018 Steel (Inch Version) NDT PAUT Calibration Block (7425)

PAUT-AWS Type Block 1018 Steel (Inch Version)

PAUT-AWS Type Block 1018 Steel
Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
Special Version of the Phased Array Calibration Standard (PACS™) with 0.060" diameter Side-drilled Holes for use with AWS requirements. Block is used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2".
PAUT-AWS Type Block 1018 Steel (Inch Version) Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
paut aws type block 304 stainless steel inch version ndt paut calibration block
PAUT-AWS Type Block 304 Stainless Steel (Inch Version) NDT PAUT Calibration Block (7426)

PAUT-AWS Type Block 304 Stainless Steel (Inch Version)

Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
Special Version of the Phased Array Calibration Standard (PACS™) with 0.060" diameter Side-drilled Holes for use with AWS requirements. Block is used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2".
PAUT-AWS Type Block 304 Stainless Steel (Inch Version) Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
paut aws type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-AWS Type Block 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7427)

PAUT-AWS Type Block 7075-T6 Aluminum (Inch Version)

PAUT-AWS Type Block 7075-T6 Aluminum
Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
Special Version of the Phased Array Calibration Standard (PACS™) with 0.060" diameter Side-drilled Holes for use with AWS requirements. Block is used for angle beam verification, probe angle exit point, caibration for wedge delay, sensitivity, DAC/TCG for thicknesses up to 2".
PAUT-AWS Type Block 7075-T6 Aluminum (Inch Version) Geometry:The three radii (0.500, 1.000, 2.000") allow for exit point verification, velocity, and sound path calculations. Block contains five holes at 0.060" diameter drilled through the 1.000" width, located at .100, .200, .400, .600, .800, 1.200, 1.400, 1.600, 1.800, and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0".
Per Page      1 - 3 of 3
  • 1