Mini IIW-2 NDT Calibration Block

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our Mini IIW-2 Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 304 Stainless Steel (inch Version) Geometry: both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)Dimensions: 1.000" x 2.000" x 6.000".
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 1018 Steel (inch Version) Geometry: both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)Dimensions: 1.000" x 2.000" x 6.000".
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 1018 Steel (Metric Version) Geometry: both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)Dimensions: 25.0mm x 50.0mm x 150.00mm.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 7075-T6 Aluminum (Metric Version) Geometry: both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)Dimensions: 25.0mm x 50.0mm x 150.00mm.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 304 Stainless Steel (Metric Version) Geometry: both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)Dimensions: 25.0mm x 50.0mm x 150.00mm.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 7075-T6 Aluminum (inch Version) Geometry: both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)Dimensions: 1.000" x 2.000" x 6.000".
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW 2 Block, 304 Stainless Steel (inch Version) (7194)

Mini IIW 2 Block, 304 Stainless Steel (inch Version)


Small and lightweight version of the full-sized IIW-2. Does everything its big brother does, at a fraction of the size and weight. The NDE Flaw mini IIW-2 measures 1" thick x 2" tall x 6" long, and contains both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)

Dimensions: 1.000" x 2.000" x 6.000". 
304 Stainless Steel(inch Version)
Mini IIW-2 Block 304 Stainless Steel (inch Version) Geometry: both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)Dimensions: 1.000" x 2.000" x 6.000".
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 1018 Steel (inch Version) (7192)

Mini IIW-2 Block 1018 Steel (inch Version)

Small and lightweight version of the full-sized IIW-2. Does everything its big brother does, at a fraction of the size and weight. The NDE Flaw mini IIW-2 measures 1" thick x 2" tall x 6" long, and contains both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)

Dimensions: 1.000" x 2.000" x 6.000". 
Alloy: 6Al-4V Titanium.
Mini IIW-2 Block 1018 Steel (inch Version) Geometry: both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)Dimensions: 1.000" x 2.000" x 6.000".
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 1018 Steel (Metric Version) (7193)

Mini IIW-2 Block 1018 Steel (Metric Version)


Small and lightweight version of the full-sized IIW-2. Does everything its big brother does, at a fraction of the size and weight. The NDE Flaw mini IIW-2 measures 25.0mm thick x 50.0mm tall x 150.0mm long, and contains both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)

Dimensions: 25.0mm x 50.0mm x 150.00mm.
1018 Steel (Metric Version)
Mini IIW-2 Block 1018 Steel (Metric Version) Geometry: both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)Dimensions: 25.0mm x 50.0mm x 150.00mm.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block 7075-T6 Aluminum (Metric Version) (7197)

Mini IIW-2 Block 7075-T6 Aluminum (Metric Version)


Small and lightweight version of the full-sized IIW-2. Does everything its big brother does, at a fraction of the size and weight. The NDE Flaw mini IIW-2 measures 25.0mm thick x 50.0mm tall x 150.0mm long, and contains both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)

Dimensions: 25.0mm x 50.0mm x 150.00mm.
7075-T6 Aluminum (Metric Version)
Mini IIW-2 Block 7075-T6 Aluminum (Metric Version) Geometry: both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)Dimensions: 25.0mm x 50.0mm x 150.00mm.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block, 304 Stainless Steel (Metric Version) (7195)

Mini IIW-2 Block, 304 Stainless Steel (Metric Version)


Small and light weight version of the full-sized IIW-2. Does everything its big brother does, at a fraction of the size and weight. The MDE Flaw mini IIW-2 measures 25.0mm thick x 50.0mm tall x 150.0mm long, and contains both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)

Dimensions: 25.0mm x 50.0mm x 150.00mm.
304 Stainless Steel (Metric Version)
Mini IIW-2 Block 304 Stainless Steel (Metric Version) Geometry: both 25.0mm and 50.0mm radii. Two sensitivity holes, one at 1.5mm, and one at 3.0mm are located 12.5mm from each scanning surface. A large 25.0mm diameter through-hole is included, along with a convenient step measuring 12.5mm thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (12.5, 18.75, and 25mm)Dimensions: 25.0mm x 50.0mm x 150.00mm.
mini iiw 2 block 7075 t6 aluminum inch version ndt ut calibration block
Mini IIW-2 Block, 7075-T6 Aluminum (inch Version) (7196)

Mini IIW-2 Block, 7075-T6 Aluminum (inch Version)


Small and lightweight version of the full-sized IIW-2. Does everything its big brother does, at a fraction of the size and weight. The NDE Flaw mini IIW-2 measures 1" thick x 2" tall x 6" long, and contains both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)

Dimensions: 1.000" x 2.000" x 6.000". 
Alloy: 7075-T6 Aluminum
Mini IIW-2 Block 7075-T6 Aluminum (inch Version) Geometry: both 1" and 2" radii. Two sensitivity holes, one at 1/16", and one at 1/8" are located .500" from each scanning surface. A large 1" diameter through-hole is included, along with a convenient step measuring .500" thick in one corner. Angle beam exit markers from 35 to 75° are machine-engraved on one face. Don’t miss that this block also includes three close-tolerance steps for thickness calibration. (0.500, .750, and 1.000”)Dimensions: 1.000" x 2.000" x 6.000".
Per Page      1 - 7 of 7
  • 1