Magnetic Particle Standard Blocks

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our Magnetic Particle Standard Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
ALUMINUM_SENSITIVITY_TEST_BLOCK
Aluminum Test Block (for Sensitivity) Cracked aluminum block compares sensitivity of different penetrants or sensitivity of new and old penetrants.
ASTM Test block ASTM test block is also known as MPT test bar used in Magnetic particle inspection. It has 7 numbers of artificial flaws(side drilled holes). Easy to carry on site. Pocket friendly.
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Central Conductor Kit, Includes one each of . Dia50″ L 15.875″, .Dia75″ L 15.875" Dia1.00″ L 15.875″″ These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Copper Pad (5″x7″) Used to prevent arc burn by helping to maintain proper electrical contact between test parts and contact heads.
Copper Pad Assembly (2 Copper Pads & V-Block) Double-Braided Pad with V-Block. Heavy copper braid provides contact over greater surface area. Built with neoprene, the V-block base centers and supports test parts. The pad can be reversed to provide two wear faces. Fits all units except A-915 and the smaller MAG Series units.
Heavy Duty Lead Contact Plate. Copper impregnated lead contact plate that lasts 10 times longer than lead contact plates. Size: 6-3/4” (171.45mm) x 6-5/8” (168.275mm) x 1/4” (6.35mm) thick Fits all units except A-915 and the smaller MAG Series units.
ketos ring
Ketos Ring The Ketos Ring is used to check overall performance of the magnetic particle examination system. The Ketos Ring is 5" in diameter and .875" thick, with a 1¼" diameter center hole. The block includes (12) thru-holes at .070" diameter and distances of .070, .140, .210, .280, .350, .420, .490, .560, .630, .700, .770, and .840" from the OD surface.
Large Copper Pad (5″ x 10″) Used to prevent arc burn by helping to maintain proper electrical contact between test parts and contact heads.
Large Copper Pad Assembly 12" x 12" (2 Copper Pads & V-Block) Double-Braided Pad with V-Block. Heavy copper braid provides contact over greater surface area. Built with neoprene, the V-block base centers and supports test parts. The pad can be reversed to provide two wear faces. Replaces standard pads with no modifications needed.
Lead Contact Plate. Duplicates original headstock/tailstock contact plates. The soft lead provides excellent contact with test part. Size: 6-3/4” (171.45mm) x 6-5/8” (168.275mm) x 1/4” (6.35mm) thick. (Fits all units except A-915 and the smaller MAG Series units.)
Magnetic Flux Indicators Flexible indicators used to detect appropriate levels of magnetic field strength and directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075", .009" and .010" that share a common depth.
Miniature QQI Model# KSC-4-230. Similar to KSC230, except miniature design for small areas on test part. The four circles may be cut apart for individual use. Flaw depth of 30% of Shim thickness, .002” thick.
mtu calibration clock
MPI MTU Calibration Block Used to test the sensitivity of Wet Method MPI Baths. Quick and easy verification and comparison of magnetic particlematerialsThe MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials.This two-sided block has a variety of indications ranging in size from small to large.Use the MTU-3 to compare
mpi weight lift block
Mpi Weight Lift block (18.0kg) AC yokes 4.5Kg with Carrying Handle. Permanent Magnet Test Weight 18Kg with Carrying Handle American Standard 22.5Kg
mpi weight lift block 976
Mpi Weight Lift block (4.5kg) AC yokes 4.5Kg with Carrying Handle. Permanent Magnet Test Weight 18Kg with Carrying Handle American Standard 22.5Kg
pie gauge
MPT PIE GAUGE The pie gauge is a disk of highly permeable material divided into four, six, or eight sections by non-ferromagnetic material.
NA-16 Notch Defect Test Bar he NA-16 Notch Test Bar complies with the requirements of MIL-STD-271E and F (Ships), paragraph 4.3.1.2, and NAVSEA-TB-T9074-AS-GIB-010/271. The procedure specifies an inspection with the ability to detect the smallest rejectable surface defects, artificial or natural, in a test specimen.
NiCr 10 micron panels (One Pair) NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
Twin_Nickel_Chro_testpanel_large
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
Stainless Steel TEST BLOCK (for washability) The stainless steel test block offers a simple and convenient comparator for monitoring washability of water-wash or post-emulsified penetrants. The “grit blasted” finish provides a rough surface which will retain background when the removability of a product has decreased when compared to fresh material. The test block should be thoroughly cleaned with SKC-S Cleaner/Remover, as well as periodically refinished (grit blast). Specifications Compliance: Complies with ASTM E165
KSC-230. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .002” thick.
KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick.
Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick
ALUMINUM_SENSITIVITY_TEST_BLOCK
Aluminum Test Block (for Sensitivity)

Aluminum Test Block (for Sensitivity)

Cracked aluminum block compares sensitivity of different penetrants or sensitivity of new and old penetrants.
Aluminum Test Block (for Sensitivity) Cracked aluminum block compares sensitivity of different penetrants or sensitivity of new and old penetrants.
ASTM Test block

ASTM Test block

ASTM test block is also known as MPT test bar used in Magnetic particle inspection. It has 7 numbers of artificial flaws(side drilled holes). Easy to carry on site. Pocket friendly.
ASTM Test block ASTM test block is also known as MPT test bar used in Magnetic particle inspection. It has 7 numbers of artificial flaws(side drilled holes). Easy to carry on site. Pocket friendly.
Central Conductor Dia1.00″ L 15.875″
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Central Conductor Dia50″ L 15.875″
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Central Conductor Dia75″ L 15.875"
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Central Conductor Kit
Central Conductor Kit, Includes one each of . Dia50″ L 15.875″, .Dia75″ L 15.875" Dia1.00″ L 15.875″″ These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Central Conductor Kit, Includes one each of . Dia50″ L 15.875″, .Dia75″ L 15.875" Dia1.00″ L 15.875″″ These solid copper rods (copper type 110) provide circular magnetization of hollow parts
Copper Pad
Copper Pad (5″x7″) Used to prevent arc burn by helping to maintain proper electrical contact between test parts and contact heads.
Copper Pad (5″x7″) Used to prevent arc burn by helping to maintain proper electrical contact between test parts and contact heads.
Copper Pad Assembly
Copper Pad Assembly (2 Copper Pads & V-Block) Double-Braided Pad with V-Block. Heavy copper braid provides contact over greater surface area. Built with neoprene, the V-block base centers and supports test parts. The pad can be reversed to provide two wear faces. Fits all units except A-915 and the smaller MAG Series units.
Copper Pad Assembly (2 Copper Pads & V-Block) Double-Braided Pad with V-Block. Heavy copper braid provides contact over greater surface area. Built with neoprene, the V-block base centers and supports test parts. The pad can be reversed to provide two wear faces. Fits all units except A-915 and the smaller MAG Series units.
Heavy Duty Lead Contact Plate
Heavy Duty Lead Contact Plate. Copper impregnated lead contact plate that lasts 10 times longer than lead contact plates. Size: 6-3/4” (171.45mm) x 6-5/8” (168.275mm) x 1/4” (6.35mm) thick Fits all units except A-915 and the smaller MAG Series units.
Heavy Duty Lead Contact Plate. Copper impregnated lead contact plate that lasts 10 times longer than lead contact plates. Size: 6-3/4” (171.45mm) x 6-5/8” (168.275mm) x 1/4” (6.35mm) thick Fits all units except A-915 and the smaller MAG Series units.
ketos ring
Ketos Ring

Ketos Ring

The Ketos Ring is used to check overall performance of the magnetic particle examination system.

The Ketos Ring is 5" in diameter and .875" thick, with a 1¼" diameter center hole. The block includes (12) thru-holes at .070" diameter and distances of .070, .140, .210, .280, .350, .420, .490, .560, .630, .700, .770, and .840" from the OD surface.
Ketos Ring The Ketos Ring is used to check overall performance of the magnetic particle examination system. The Ketos Ring is 5" in diameter and .875" thick, with a 1¼" diameter center hole. The block includes (12) thru-holes at .070" diameter and distances of .070, .140, .210, .280, .350, .420, .490, .560, .630, .700, .770, and .840" from the OD surface.
Large Copper Pad
Large Copper Pad (5″ x 10″) Used to prevent arc burn by helping to maintain proper electrical contact between test parts and contact heads.
Large Copper Pad (5″ x 10″) Used to prevent arc burn by helping to maintain proper electrical contact between test parts and contact heads.
Large Copper Pad Assembly
Large Copper Pad Assembly 12" x 12" (2 Copper Pads & V-Block) Double-Braided Pad with V-Block. Heavy copper braid provides contact over greater surface area. Built with neoprene, the V-block base centers and supports test parts. The pad can be reversed to provide two wear faces. Replaces standard pads with no modifications needed.
Large Copper Pad Assembly 12" x 12" (2 Copper Pads & V-Block) Double-Braided Pad with V-Block. Heavy copper braid provides contact over greater surface area. Built with neoprene, the V-block base centers and supports test parts. The pad can be reversed to provide two wear faces. Replaces standard pads with no modifications needed.
Lead Contact Plate
Lead Contact Plate. Duplicates original headstock/tailstock contact plates. The soft lead provides excellent contact with test part. Size: 6-3/4” (171.45mm) x 6-5/8” (168.275mm) x 1/4” (6.35mm) thick. (Fits all units except A-915 and the smaller MAG Series units.)
Lead Contact Plate. Duplicates original headstock/tailstock contact plates. The soft lead provides excellent contact with test part. Size: 6-3/4” (171.45mm) x 6-5/8” (168.275mm) x 1/4” (6.35mm) thick. (Fits all units except A-915 and the smaller MAG Series units.)
Magnetic Flux Indicators, Type G, Set of 5
Magnetic Flux Indicators Flexible indicators used to detect appropriate levels of magnetic field strength and directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075", .009" and .010" that share a common depth. The indicators are manfuactured from permeable magnetic steel sandwiched between two brass plates and designed for repeated use in setting and monitoring magnetic field strength in wet and dry MPI applications. Meets ASTM E 1444-11, Annex A3 specifications.
Magnetic Flux Indicators Flexible indicators used to detect appropriate levels of magnetic field strength and directional orientation during the magnetic particle testing process. Each indicator contains three milled slots with widths of .0075", .009" and .010" that share a common depth.
Miniature QQI-Model KSC4-230 5 SET
Miniature QQI Model# KSC-4-230. Similar to KSC230, except miniature design for small areas on test part. The four circles may be cut apart for individual use. Flaw depth of 30% of Shim thickness, .002” thick.
Miniature QQI Model# KSC-4-230. Similar to KSC230, except miniature design for small areas on test part. The four circles may be cut apart for individual use. Flaw depth of 30% of Shim thickness, .002” thick.
mtu calibration clock
MPI MTU Calibration Block

MPI MTU Calibration Block

Used to test the sensitivity of Wet Method MPI Baths.
Quick and easy verification and comparison of magnetic particlematerialsThe MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials.This two-sided block has a variety of indications ranging in size from small to large.Use the MTU-3 to compare:• fresh and used materials• different brands of materials• different types of materials (visible, dual sensitivity and fluorescent, etc.)Use the MTU-3 to verify:• That aerosol cans are actually delivering particles MTU-3 Blocks are prepared in accordance with the EN ISO 9934 – 2: 2002.• Natural cracks on both sides• Can be used with fluorescent or visible particles• Supplied with reference photograph Steel Disc - 50 mm in diameter by 11 mm thick, with a 
10.5 mm hole through the center
MPI MTU Calibration Block Used to test the sensitivity of Wet Method MPI Baths. Quick and easy verification and comparison of magnetic particlematerialsThe MTU-3 Test Block is used to check the sensitivity of magnetic-particle materials.This two-sided block has a variety of indications ranging in size from small to large.Use the MTU-3 to compare
mpi weight lift block
Mpi Weight Lift block (18.0kg)

Mpi Weight Lift block (18.0kg)


Lift Test Weights

The weights are required to test the magnetic field produced by Electro-Magnets and Permanent Magnets to ensure parts are being sufficiently inspected when using MPI methods of NDT

Electromagnetic Yoke Test Weight for use with AC yokes 4.5Kg with Carrying Handle.

Permanent Magnet Test Weight 18Kg with Carrying Handle

American Standard 22.5Kg

Mpi Weight Lift block (18.0kg) AC yokes 4.5Kg with Carrying Handle. Permanent Magnet Test Weight 18Kg with Carrying Handle American Standard 22.5Kg
mpi weight lift block 976
Mpi Weight Lift block (4.5kg)

Mpi Weight Lift block (4.5kg)

Lift Test Weights
The weights are required to test the magnetic field produced by Electro-Magnets and Permanent Magnets to ensure parts are being sufficiently inspected when using MPI methods of NDT

Electromagnetic Yoke Test Weight for use with AC yokes 4.5Kg with Carrying Handle.

Permanent Magnet Test Weight 18Kg with Carrying Handle

American Standard 22.5Kg

Mpi Weight Lift block (4.5kg) AC yokes 4.5Kg with Carrying Handle. Permanent Magnet Test Weight 18Kg with Carrying Handle American Standard 22.5Kg
pie gauge
MPT Pie Gauge

MPT PIE GAUGE

The pie gauge is a disk of highly permeable material divided into four, six, or eight sections by non-ferromagnetic material. The divisions serve as artificial defects that radiate out in different directions from the center. The diameter of the gauge is 3/4 to 1 inch. The divisions between the low carbon steel pie sections are to be no greater than 1/32 inch. The sections are furnace brazed and copper plated. The gauge is placed on the test piece copper side up and the test piece is magnetized. After particles are applied and the excess removed, the indications provide the inspector the orientation of the magnetic field.

The principal application is on flat surfaces such as weldments or steel castings where dry powder is used with a yoke or prods. The pie gauge is not recommended for precision parts with complex shapes, for wet-method applications, or for proving field magnitude. The gauge should be demagnetized between readings.

Several of the main advantages of the pie gauge are that it is easy to use and it can be used indefinitely without deterioration. The pie gauge has several disadvantages, which include: it retains some residual magnetism so indications will prevail after removal of the source of magnetization, it can only be used in relatively flat areas, and it cannot be reliably used for determination of balanced fields in multidirectional magnetization.
MPT PIE GAUGE The pie gauge is a disk of highly permeable material divided into four, six, or eight sections by non-ferromagnetic material.
NA-16 Notch Defect Test Bar
NA-16 Notch Defect Test Bar he NA-16 Notch Test Bar complies with the requirements of MIL-STD-271E and F (Ships), paragraph 4.3.1.2, and NAVSEA-TB-T9074-AS-GIB-010/271. The procedure specifies an inspection with the ability to detect the smallest rejectable surface defects, artificial or natural, in a test specimen.
NA-16 Notch Defect Test Bar he NA-16 Notch Test Bar complies with the requirements of MIL-STD-271E and F (Ships), paragraph 4.3.1.2, and NAVSEA-TB-T9074-AS-GIB-010/271. The procedure specifies an inspection with the ability to detect the smallest rejectable surface defects, artificial or natural, in a test specimen.
NiCr 10 micron panels (One Pair)
NiCr 10 micron panels (One Pair) NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr 10 micron panels (One Pair) NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr 20 micron panels (One Pair)
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr 30 micron panels (One Pair)
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
Twin_Nickel_Chro_testpanel_large
NiCr 50 micron panels (One Pair)
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
NiCr Test Panels are ideal comparators to test penetrant sensitivity.
Stainless Steel Test Block (for washability)
Stainless Steel TEST BLOCK (for washability) The stainless steel test block offers a simple and convenient comparator for monitoring washability of water-wash or post-emulsified penetrants. The “grit blasted” finish provides a rough surface which will retain background when the removability of a product has decreased when compared to fresh material. The test block should be thoroughly cleaned with SKC-S Cleaner/Remover, as well as periodically refinished (grit blast). Specifications Compliance: Complies with ASTM E165
Stainless Steel TEST BLOCK (for washability) The stainless steel test block offers a simple and convenient comparator for monitoring washability of water-wash or post-emulsified penetrants. The “grit blasted” finish provides a rough surface which will retain background when the removability of a product has decreased when compared to fresh material. The test block should be thoroughly cleaned with SKC-S Cleaner/Remover, as well as periodically refinished (grit blast). Specifications Compliance: Complies with ASTM E165
Standard QQI-Model KSC-230
KSC-230. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .002” thick.
KSC-230. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .002” thick.
Standard QQI-Model KSC-430
KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
Standard QQI-Model KSC-430
KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
KSC-430. Basic circular and crossed bar flaw configuration suitable for longitudinal and circular fields. Flaw depth of 30% of Shim thickness, .004” thick.
Variable depth QQI-Model KSC4-234
Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick.
Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick.
Variable depth QQI-Model KSC4-234
Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick
Variable Depth QQI Model# KSC4-234. Used for more quantitative work, three concentric circular flaws of differing depth. Flaws depth of 20%/30%/40% of Shim thickness, .004” thick
Per Page      1 - 30 of 30
  • 1