Liquid Penetrant Test Prop Block

NDE offers Liquid Penetrant Test Prop Block coming in Carbon Steel, Aluminum, Stainless Steel and other alloys. If you have any questions about NDE and our Liquid Penetrant Test Prop Block, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. Our knowledgeable customer service staff is happy to assist you.
Sort By:  
Liquid Penetrant Test Prop Block Geometry: Plate contains (12) mirco-holes (NSTR-99) and (1) linear indication (EDM Notch). Micro-holes are .004" to .005" in diameter and .008" to .010" deep. Notch is typically .010 - .015" deep x .002 - .003" wide x .250" long. Plate is 1/2" thick x 5" x 7".
NSTR-99 LP Personnel Qualification Test Props Geometry: These liquid penetrant test props usually contain at least (4) micro-holes .004" to .005" in diameter by .008" to .010" deep. Holes can be machined in welded plate, pipe, bolts, bevel canopies, c-canopies, socket welds, or any test prop.
Liquid Penetrant Test Prop Block (7176)

Liquid Penetrant Test Prop Block

Geometry: Plate contains (12) mirco-holes (NSTR-99) and (1) linear indication (EDM Notch). Micro-holes are .004" to .005" in diameter and .008" to .010" deep. Notch is typically .010 - .015" deep x .002 - .003" wide x .250" long. Plate is 1/2" thick x 5" x 7".

Popular Navy LP prop consisting of a stainless steel plate with (3) welds. Both the plate material and weld filler material are 300 series stainless steel. One weld is 1/32" reinforcement and is contoured (ground); the second is 1//16" reinforcement in the as-welded condition; the third is an as-welded root weld in a 90° V-groove.
Liquid Penetrant Test Prop Block Geometry: Plate contains (12) mirco-holes (NSTR-99) and (1) linear indication (EDM Notch). Micro-holes are .004" to .005" in diameter and .008" to .010" deep. Notch is typically .010 - .015" deep x .002 - .003" wide x .250" long. Plate is 1/2" thick x 5" x 7".
NSTR-99 LP Personnel Qualification Test Props (7177)
NSTR-99 LP Personnel Qualification Test Props Geometry: These liquid penetrant test props usually contain at least (4) micro-holes .004" to .005" in diameter by .008" to .010" deep. Holes can be machined in welded plate, pipe, bolts, bevel canopies, c-canopies, socket welds, or any test prop. In accordance with U.S. Navy's NSTR-99 Rev. 3 (Qualification Examination Requirements for Nondestructive Test Personnel).
NSTR-99 LP Personnel Qualification Test Props Geometry: These liquid penetrant test props usually contain at least (4) micro-holes .004" to .005" in diameter by .008" to .010" deep. Holes can be machined in welded plate, pipe, bolts, bevel canopies, c-canopies, socket welds, or any test prop.
Per Page      1 - 2 of 2
  • 1