IOW Beam Profile NDT Calibration Blocks

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our IOW Beam Profile Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
iow block 1018 steel inch version ndt ut calibration block
IOW Block 1018 Steel (Metric Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 305mm x 75mm x 50mm.
iow block 1018 steel inch version ndt ut calibration block
IOW Block 304 Stainless Steel (inch Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 12" x 3" x 2"
iow block 1018 steel inch version ndt ut calibration block
IOW Block 304 Stainless Steel (Metric Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 305mm x 75mm x 50mm.
iow block 1018 steel inch version ndt ut calibration block
IOW Block 7075-T6 Aluminum (inch Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 12" x 3" x 2"
iow block 1018 steel inch version ndt ut calibration block
IOW Block 1018 Steel (inch Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 12" x 3" x 2"
iow block 1018 steel inch version ndt ut calibration block
IOW Block 7075-T6 Aluminum (Metric Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 305mm x 75mm x 50mm.
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
iow block 1018 steel inch version ndt ut calibration block
IOW Block 1018 Steel (Metric Version) (7171)

IOW Block 1018 Steel (Metric Version)


Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 305mm x 75mm x 50mm.
• Made from 1018 Steel (Metric Version)
IOW Block 1018 Steel (Metric Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 305mm x 75mm x 50mm.
iow block 1018 steel inch version ndt ut calibration block
IOW Block 304 Stainless Steel (inch Version) (7172)

IOW Block 304 Stainless Steel (inch Version)


Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 12" x 3" x 2" 
• Made from 304 Stainless Steel (inch Version)
IOW Block 304 Stainless Steel (inch Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 12" x 3" x 2"
iow block 1018 steel inch version ndt ut calibration block
IOW Block 304 Stainless Steel, (Metric Version) (7173)

IOW Block 304 Stainless Steel (Metric Version) 

Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 305mm x 75mm x 50mm.
• Made from  304 Stainless Steel, (Metric Version) 
IOW Block 304 Stainless Steel (Metric Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 305mm x 75mm x 50mm.
iow block 1018 steel inch version ndt ut calibration block
IOW Block 7075-T6 Aluminum (inch Version) (7174)

IOW Block 7075-T6 Aluminum (inch Version)

Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 12" x 3" x 2"
• Made from 7075-T6 Aluminum (inch Version)
IOW Block 7075-T6 Aluminum (inch Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 12" x 3" x 2"
iow block 1018 steel inch version ndt ut calibration block
IOW Block, 1018 Steel (inch Version) (7170)

IOW Block, 1018 Steel (inch Version)

Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 12" x 3" x 2"
• Made from 1018 Steel (inch Version) 
IOW Block 1018 Steel (inch Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 12" x 3" x 2"
iow block 1018 steel inch version ndt ut calibration block
IOW Block, 7075-T6 Aluminum (Metric Version) (7175)

IOW Block, 7075-T6 Aluminum (Metric Version)


Used for beam profile measurement of angle beam transducers and measurement of transducer angles. Contains nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.
• Dimensions: 305mm x 75mm x 50mm.
• Made from 7075-T6 Aluminum (Metric Version)
IOW Block 7075-T6 Aluminum (Metric Version) Geometry: nine 1.5mm diameter x 22mm deep side drilled holes. In accordance with British Standard 2704 requirements.Dimensions: 305mm x 75mm x 50mm.
Per Page      1 - 7 of 7
  • 1