Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
10 step block 1018 carbon steel inch version
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
5 step block carbon steel 1018 ndt calibration block
5 Step Block 304 Stainless Steel 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step block 316 Stainless Steel Inch Version 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Block Carbon Steel 1018-Metric 5B 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block 2024 Aluminum 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Alloy Steel-4340 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Hastelloy C276 Block 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Titanium 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block, Magnesium 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step, Block Carbon Steel 1018-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5B 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Stainless Steel 304-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Stainless Steel 304-Metric 5B Block 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
asme basic block 304 stainless steel ndt calibration block
ASME Basic ½" Block 7075-T6 Aluminum (long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 3" Block 304 Stainless Steel Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set of 19-304 Stainless Steel ASTM E428 Area Amplitude Calibration Blocks, 304 Stainless Steel, Set of 19. Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set of 19-7075 Aluminum ASTM E127 Area Amplitude Calibration Blocks, 7075 Aluminum, Set of 19. Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set of 19-Titanium ASTM E428 Area Amplitude Calibration Blocks, Titanium, Set of 19 Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set of 19-4340 Steel ASTM E428 Area Amplitude Calibration Blocks, 4340 Steel, Set of 19. Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 1018 Steel (Navy Version 3020) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 304 Stainless Steel (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 304 Stainless Steel (Navy Version 3020) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 7075-T6 Aluminum (Metric Version) Geometry: CContains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments.
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 7075-T6 Aluminum (Navy Version 3020) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 7075-T6 Aluminum (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 1018 Steel (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
10 step block 1018 carbon steel inch version
10 Step, Block, Titanium, (Metric 10B) (7018)

10 Step Block Titanium (Metric 10B)

10 Step Calibration Block
The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
5 step block carbon steel 1018 ndt calibration block
5 Step Block 304 Stainless Steel (7057)

5 Step Block 304 Stainless Steel

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Block 304 Stainless Steel 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step block 316 Stainless Steel Inch Version (7051)

5 Step block 316 Stainless Steel Inch Version

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step block 316 Stainless Steel Inch Version 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Block Carbon Steel 1018-Metric 5B (7056)

5 Step Block Carbon Steel 1018-Metric 5B

5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Block Carbon Steel 1018-Metric 5B 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block 2024 Aluminum (7050)

5 Step Calibration Block 2024 Aluminum

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block 2024 Aluminum 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Alloy Steel-4340 (7053)

5 Step Calibration Block Alloy Steel-4340


5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block Alloy Steel-4340 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Hastelloy C276 Block (7058)

5 Step Calibration Block Hastelloy C276 Block

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block Hastelloy C276 Block 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Titanium (7064)

5 Step Calibration Block Titanium

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block Titanium 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block, Magnesium (7062)

5 Step Calibration Block, Magnesium

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block, Magnesium 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step, Block Carbon Steel 1018-Metric 5A (7055)

5 Step, Block Carbon Steel 1018-Metric 5A

5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step, Block Carbon Steel 1018-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5A (7065)

5-Step Block Aluminum 7075-T6-Metric 5A

5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5-Step Block Aluminum 7075-T6-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5B (7066)

5-Step Block Aluminum 7075-T6-Metric 5B


5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5-Step Block Aluminum 7075-T6-Metric 5B 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Stainless Steel 304-Metric 5A (7067)

5-Step Block Stainless Steel 304-Metric 5A

5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5-Step Block Stainless Steel 304-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Stainless Steel 304-Metric 5B Block (7068)

5-Step Stainless Steel 304-Metric 5B Block


5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5-Step Stainless Steel 304-Metric 5B Block 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
asme basic block 304 stainless steel ndt calibration block
ASME Basic cal ½" Block 7075-T6 Aluminum (long version) NDT Calibration Block (7280)

ASME Basic cal ½" Block 7075-T6 Aluminum (long version)

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 6" long
  • Material: 7075-T6 Aluminum
ASME Basic ½" Block 7075-T6 Aluminum (long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 3" Block 304 Stainless Steel (7267)

ASME Basic Calibration 3" Block 304 Stainless Steel

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 3" thick x 6¼" wide x 9"
  • Material: 304 Stainless Steel
ASME Basic Calibration 3" Block 304 Stainless Steel Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set of 19, 304 Stainless Steel (7091)

ASTM Distance Amplitude Set of 19, 304 Stainless Steel


Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD)and signal amplitude. All blocks have the same size flat-bottom hole and varying MTD. Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”). In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and response plot from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: Metal travel distances are: .063”, .125”, .250”, .375”, .500”, .625”, .750”, .875”, 1.000”, 1.250”, 1.750”, 2.250”, 2.750”, 3.250”, 3.750”, 4.250”, 4.750”, 5.250” and 5.750”. Block diameter is 2.0".
• Made from 304 Stainless Steel
ASTM Distance Amplitude Set of 19-304 Stainless Steel ASTM E428 Area Amplitude Calibration Blocks, 304 Stainless Steel, Set of 19. Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set of 19, 7075 Aluminum (7093)

ASTM Distance Amplitude Set of 19, 7075 Aluminum


Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD)and signal amplitude. All blocks have the same size flat-bottom hole and varying MTD. Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”). In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and response plot from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: Metal travel distances are: .063”, .125”, .250”, .375”, .500”, .625”, .750”, .875”, 1.000”, 1.250”, 1.750”, 2.250”, 2.750”, 3.250”, 3.750”, 4.250”, 4.750”, 5.250” and 5.750”. Block diameter is 2.0".
• Made from Type 7075 Aluminum.
ASTM Distance Amplitude Set of 19-7075 Aluminum ASTM E127 Area Amplitude Calibration Blocks, 7075 Aluminum, Set of 19. Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Distance Amplitude Set, of 19-Titanium (7094)

ASTM Distance Amplitude Set, of 19-Titanium


Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD)and signal amplitude. All blocks have the same size flat-bottom hole and varying MTD. Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”). In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and response plot from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: Metal travel distances are: .063”, .125”, .250”, .375”, .500”, .625”, .750”, .875”, 1.000”, 1.250”, 1.750”, 2.250”, 2.750”, 3.250”, 3.750”, 4.250”, 4.750”, 5.250” and 5.750”. Block diameter is 2.0".
• Made from 6AL-4V Titanium.
ASTM Distance Amplitude Set of 19-Titanium ASTM E428 Area Amplitude Calibration Blocks, Titanium, Set of 19 Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
ASTM E317, Block, Figure 1, 7075-T6 Aluminum (Inch Version) (7103)

ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version)

Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
In accordance with ASTM E317 Figure 1.
ASTM E317 horizontal and vertical linearity block, Figure 1 is used for evaluating the horizontal and vertical linearity characteristics of ultrasonic pulse-echo systems.
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM, Distance Amplitude Set of 19, 4340 Steel (7092)

ASTM, Distance Amplitude Set of 19, 4340 Steel


Set of nineteen flat-bottom hole blocks used to determine the relationship between metal travel distance (MTD)and signal amplitude. All blocks have the same size flat-bottom hole and varying MTD. Hole diameter must be specified when ordering (3/64”, 5/64” or 8/64”). In accordance with ASTM E127. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and response plot from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: Metal travel distances are: .063”, .125”, .250”, .375”, .500”, .625”, .750”, .875”, 1.000”, 1.250”, 1.750”, 2.250”, 2.750”, 3.250”, 3.750”, 4.250”, 4.750”, 5.250” and 5.750”. Block diameter is 2.0".
• Made from 4340 Steel.
ASTM Distance Amplitude Set of 19-4340 Steel ASTM E428 Area Amplitude Calibration Blocks, 4340 Steel, Set of 19. Geometry:Set of 19 blocks which contain hole diameters of 3/64", 5/64" or 8/64" with metal travel distances of: .06", .12",.25",.37",.50", .62",.75",.87",1.0",1.25", 1.75", 2.25", 2.75", 3.25", 3.75", 4.25", 4.75", 5.25" and 5.75".
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing, Block, 304 Stainless Steel (7152)

EDM Slot Sizing Block 304 Stainless Steel

Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block.
Dimensions: 1.000" x 1.000" x 10.000".
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 1018 Steel (Navy Version 3020) (7202)

Navships Test Block 1018 Steel (Navy Version 3020)

Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".

In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 1018 Steel (Navy Version 3020) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 304 Stainless Steel (inch Version) (7203)

Navships Test Block 304 Stainless Steel (inch Version)


Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance with MIL-STD-271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.
Navships Test Block 304 Stainless Steel (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 304 Stainless Steel (Navy Version 3020) (7204)

Navships Test Block 304 Stainless Steel (Navy Version 3020)

Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".

In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 304 Stainless Steel (Navy Version 3020) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 7075-T6 Aluminum (Metric Version) (7206)

Navships Test Block 7075-T6 Aluminum (Metric Version)


Geometry: CContains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments. Used for distance amplitude correction, sensitivity levels and flaw depth information. In accordance with Metric equivalent of U.S. customary block, based on MIL-STD-271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6.
Navships Test Block 7075-T6 Aluminum (Metric Version) Geometry: CContains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments.
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block 7075-T6 Aluminum (Navy Version 3020) (7207)

Navships Test Block 7075-T6 Aluminum (Navy Version 3020)

Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".

In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 7075-T6 Aluminum (Navy Version 3020) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships Test Block, 7075-T6 Aluminum (inch Version) (7205)

Navships Test Block 7075-T6 Aluminum (inch Version)


Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance with MIL-STD-271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.
Navships Test Block 7075-T6 Aluminum (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
navships test block 7075 t6 aluminum inch version ndt calibration block
Navships, Test Block, 1018 Steel (inch Version) (7201)

Navships Test Block 1018 Steel (inch Version)


Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance with MIL-STD-271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.
Navships Test Block 1018 Steel (inch Version) Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block, 304 Stainless Steel (Metric Version) (7416)

PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
Per Page      1 - 30 of 32