Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
10 step block 1018 carbon steel inch version
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
ASTM_E317_Block_Figure_1.jpg
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
eddy current tube standard iris
Internal Rotary Inspection System Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
mini angle beam inch aluminum
Mab Mini Angle Beam, Inch, Titanium Block miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam inch aluminum
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam inch aluminum
Mini Angle Beam Block 25mmm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
mini angle beam inch aluminum
Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam metric aluminum
Mini Angle Beam, Metric, Aluminum Block The METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. In accordance with PH Tool drawing No. 10170, a metric equivelant, based on ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 1018 Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
Ultrasonic Thickness Gauge NdeTech-UTG702 Functions & Features • Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable. • Display contents: thickness value, coupling condition, power state, CAL calibration state, sound velocity. • Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve the measurement precision. • Zero adjustment: auto returning to zero when you press the key after the probe is put on the specimen. • Simply and easily operated. • Nonlinear correction, automatic compensation, in order to improve the measurement accuracy. • The test block of measuring sound velocity of known thickness. • Battery information indicates the rest capacity of the battery, Auto sleep and auto power off function to conserve battery life. • Optional software to process the memory data on the PC. • Alarm function: setting the measurement limit and alarming for the results beyond the limit.
10 step block 1018 carbon steel inch version
10 Step, Block, Titanium, (Metric 10B) (7018)

10 Step Block Titanium (Metric 10B)

10 Step Calibration Block
The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
ASTM_E317_Block_Figure_1.jpg
ASTM E317, Block, Figure 1, 7075-T6 Aluminum (Inch Version) (7103)

ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version)

Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
In accordance with ASTM E317 Figure 1.
ASTM E317 horizontal and vertical linearity block, Figure 1 is used for evaluating the horizontal and vertical linearity characteristics of ultrasonic pulse-echo systems.
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing, Block, 304 Stainless Steel (7152)

EDM Slot Sizing Block 304 Stainless Steel

Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block.
Dimensions: 1.000" x 1.000" x 10.000".
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
eddy current tube standard iris
ET Calibration Tube Standards

Internal Rotary Inspection System Tube

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

IRIS

Comments

Heat Exchangers

Nonferromagnetic material Stainless steel, Cu/Ali

X

– ECT is the recommended choice for its speed and accuracy.- IRIS can sometimes be used to confirm the sizing of ID defects.

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.

Ferromagnetic material Carbon steel, nickel. Typical defects are pitting and corrosion.

X

– RFT, MFL, and IRIS are good, and most of the time complementary.

Air Coolers

Carbon steel tube with aluminum fins Typical defects are ID pitting and OD wear close to the water box.

X

– RFT is not effective because the fins disturb the remote field.- MFL is quick and sensitive but does not allow sizing.- IRIS is often used to back up MFL but has difficulty with OD flaws.

Boilers

Carbon steel tube Typical defects are pitting, wear, and cracking at the tube sheet.

X

– RFT is good for wear detection and can easily pass the bend.- MFL is good only on straight boiler tubes without swages.- IRIS is good for wear and pits but has no sensitivity in the bend.

Internal Rotary Inspection System Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
mini angle beam inch aluminum
Mab Mini Angle Beam, Inch, Titanium Block (7185)

Mab Mini Angle Beam, Inch, Titanium Block

miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.

• Dimensions: 1.000" thick.
• Also available in .500" thickness.
Mab Mini Angle Beam, Inch, Titanium Block miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam inch aluminum
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) (7234)

Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) (7235)

Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) Geometry:1.0&quot; radius opposite a 2.0&quot; radius, and a 5/64&quot; diameter x .375&quot; deep flat-bottom hole. Dimensions: 1.000&quot; thick. (also available in .500&quot; thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) (7236)

Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam inch aluminum
Mini Angle Beam Block 25mm 1018 Steel (Inch Version) (7240)

Mini Angle Beam Block 25mmm 1018 Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm 1018 Steel (Inch Version) Geometry:1.0&quot; radius opposite a 2.0&quot; radius, and a 5/64&quot; diameter x .750&quot; deep flat-bottom hole. Dimensions: 1.000&quot; thick. (also available in .500&quot; thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) (7237)

Mini Angle Beam Block 25mm 1018 Steel (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Inch Version) (7241)

Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) (7238)

Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) (7239)

Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
mini angle beam inch aluminum
Mini Angle Beam Block, 25mm. 7075-T6 Aluminum (Inch Version) (7242)

Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version)

Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version) Geometry:1.0&quot; radius opposite a 2.0&quot; radius, and a 5/64&quot; diameter x .750&quot; deep flat-bottom hole. Dimensions: 1.000&quot; thick. (also available in .500&quot; thickness, see here)
mini angle beam metric aluminum
Mini Angle Beam, Metric, Aluminum Block (7191)

Mini Angle Beam, Metric, Aluminum Block

The METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with PH Tool drawing No. 10170, a metric equivelant, based on ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Block measures 25 mm thick and contains a 25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).

• Dimensions: 25 mm thick.
Mini Angle Beam, Metric, Aluminum Block The METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. In accordance with PH Tool drawing No. 10170, a metric equivelant, based on ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block, 304 Stainless Steel (Metric Version) (7416)

PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675, Block 7075-T6 Aluminum (Metric Version) (7417)

PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW, ISO 19675, Block, 1018 Steel (Metric Version) NDT PAUT Calibration Block (7415)

PAUT IIW ISO 19675 Block 1018 Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 1018 Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
Ultrasonic Thickness Gauge NdeTech-UTG702 (NDETECH-UTG702)

Ultrasonic Thickness Gauge NdeTech-UTG702

Functions & Features        

  • Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable.
  • Display contents: thickness value, coupling condition, power state, CAL calibration state, sound velocity.
  • Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve the measurement precision.
  • Zero adjustment: auto returning to zero when you press the key after the probe is put on the specimen.
  • Simply and easily operated.
  • Nonlinear correction, automatic compensation, in order to improve the measurement accuracy.
  • The test block of measuring sound velocity of known thickness.
  • Battery information indicates the rest capacity of the battery, Auto sleep and auto power off function to conserve battery life.
  • Optional software to process the memory data on the PC.
  • Alarm function: setting the measurement limit and alarming for the results beyond the limit.

Measuring Materials                 

  • Adapted to measure the thickness of good conductor for ultrasonic, such as metal (steel, cast iron, aluminum, copper), plastic, ceramic, glass, glass fiber and so on.

 

Technical Parameters

Measuring range(mm)

0.7~300

Resolution(mm)

0.01

Accuracy(mm)

±(0.5%H+0.04)mm,H is thickness

Velocity range(m/s)

1000~9999

Velocity measurement

Storage

500 Groups

Shell

Plastic

Operating temperature

-10~60

Dampness

20%~90%

Dimensions

130×70×25mm

Power supply

2 AAA alkaline batteries

Weight

200g

Standard Delivery

Main unit, Probes, Couplant bottle

Ultrasonic Thickness Gauge NdeTech-UTG702 Functions & Features • Display: LCD with LED backlight .The brightness and the contrast of the LCD is adjustable. • Display contents: thickness value, coupling condition, power state, CAL calibration state, sound velocity. • Able to measure the ultrasonic velocity in turn if the thickness value is known in order to improve the measurement precision. • Zero adjustment: auto returning to zero when you press the key after the probe is put on the specimen. • Simply and easily operated. • Nonlinear correction, automatic compensation, in order to improve the measurement accuracy. • The test block of measuring sound velocity of known thickness. • Battery information indicates the rest capacity of the battery, Auto sleep and auto power off function to conserve battery life. • Optional software to process the memory data on the PC. • Alarm function: setting the measurement limit and alarming for the results beyond the limit.
Per Page      1 - 19 of 19
  • 1