Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) Geometry:The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface. Dimensions: 450mm x 50mm x 25mm
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 304 Stainless Steel (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 304 Stainless (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 7075 Aluminum (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block Titanium (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 1018 Carbon Steel (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
thin step block 1018 steel inch version ndt calibration block
Thin Step Block 1018 Carbon Steel (Metric Version) Thin Step Calibration Block for thickness and linearity calibration. Metric Version: Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm) Step Face - Metric Version - 20mm x 20mm
thin step block 1018 steel inch version ndt calibration block
Thin Step Block 7075 Aluminum (Metric Version) Thin Step Calibration Block for thickness and linearity calibration. Metric Version: Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm) Step Face - Metric Version - 20mm x 20mm
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy Step Block 304 Stainless Steel (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy Block 7075 Aluminum (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy, Step Block, 1018 Carbon Steel (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
v3 test block 304 stainless steel metric version ndt ut calibration block
V3 Test Block 304 Stainless Steel (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
v3 test block 1018 steel metric version ndt ut calibration block
V3 Test Block Titanium (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
v3 test block 1018 steel metric version ndt ut calibration block
V3 Test Block 1018 Steel (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
v3 test block 304 stainless steel metric version ndt ut calibration block
V3 Test Block,7075-T6 Aluminum (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step Block 304 Stainless Steel (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step Block, 1018 Carbon Steel (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step block, Block 7075 Aluminum (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002" VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) NDT PAUT Calibration Block (7439)
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) Geometry:The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface. Dimensions: 450mm x 50mm x 25mm Phased Array Calibration Standard Blocks are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) Geometry:The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface. Dimensions: 450mm x 50mm x 25mm
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 304 Stainless Steel (Metric Version) NDT PAUT Calibration Block (7442)

PAUT-Type A Block 304 Stainless Steel (Metric Version)

Geometry:100.0 mm and 50.0m radii
19 through holes at 1.0mm diameter
1 through hole at 2.0mm diameter
4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep
4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep
3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius
4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long.
Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 304 Stainless Steel (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) NDT PAUT Calibration Block (7444)

PAUT-Type A Block 7075-T6 Aluminum (Metric Version)

Geometry:100.0 mm and 50.0m radii
19 through holes at 1.0mm diameter
1 through hole at 2.0mm diameter
4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep
4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep
3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius
4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long.
Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 304 Stainless (Metric Version) (7215)

SC Block 304 Stainless (Metric Version)


AWS-type sc block used for shear wave sensitivity calibration. Contains two .062" diameter through holes. In accordance with ASTM E164 and BRR/AWS requirements.
• Dimensions: 3.000" x 1.250" x .905"
SC Block 304 Stainless (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 7075 Aluminum, (Metric Version) (7217)

SC Block 7075 Aluminum (Metric Version)


AWS Type SC Calibration Block is Sensitivity Reference Block.
Geometry:062" diameter through holes.
3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.

AWS-type block used for shear wave sensitivity calibration.
• Metric version
SC Block 7075 Aluminum (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block Titanium (Metric Version) (7219)

SC Block Titanium (Metric Version)


AWS Type SC Calibration Block is Sensitivity Reference Block.
Geometry:062" diameter through holes.
3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.

AWS-type block used for shear wave sensitivity calibration.
• Metric version
SC Block Titanium (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block, 1018 Carbon Steel (Metric Version) (7213)

SC Block 1018 Carbon Steel (Metric Version)

AWS Type SC Calibration Block is Sensitivity Reference Block.
Geometry:062" diameter through holes.
3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
AWS-type block used for shear wave sensitivity calibration. Contains two .062" diameter through holes. In accordance with ASTM E164 and BRR/AWS requirements.
Dimensions: 3.000" x 1.250" x .905"
SC Block 1018 Carbon Steel (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
thin step block 1018 steel inch version ndt calibration block
Thin Step Block 1018 Carbon Steel (Metric Version) (7221)

Thin Step Block 1018 Carbon Steel (Metric Version)

Thin Step Calibration Block for thickness and linearity calibration.
Metric Version:
Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm)
Step Face - Metric Version - 20mm x 20mm
Thin Step Block 1018 Carbon Steel (Metric Version) Thin Step Calibration Block for thickness and linearity calibration. Metric Version: Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm) Step Face - Metric Version - 20mm x 20mm
thin step block 1018 steel inch version ndt calibration block
Thin Step Block 7075 Aluminum (Metric Version) (7224)

Thin Step Block 7075 Aluminum (Metric Version)

Thin Step Calibration Block for thickness and linearity calibration.
Metric Version:
Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm)
Step Face - Metric Version - 20mm x 20mm
Thin Step Block 7075 Aluminum (Metric Version) Thin Step Calibration Block for thickness and linearity calibration. Metric Version: Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm) Step Face - Metric Version - 20mm x 20mm
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy Step Block 304 Stainless Steel (Metric Version) (7229)

Tipsy Step Block 304 Stainless Steel (Metric Version)

Tipsy Thickness Calibration Block
Metric Version:
Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps.
Metric Step Face: 25mm x 25mm
Step thickness tolerance: ±0.04mm
Tipsy Step Block 304 Stainless Steel (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy Step Block, 7075 Aluminum (Metric Version) (7230)

Tipsy Step Block, 7075 Aluminum (Metric Version)

Tipsy Thickness Calibration Block
Metric Version:
Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps.
Metric Step Face: 25mm x 25mm
Step thickness tolerance: ±0.04mm
Tipsy Block 7075 Aluminum (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy, Step Block, 1018 Carbon Steel (Metric Version) (7228)

Tipsy, Step Block, 1018 Carbon Steel (Metric Version)

Tipsy Thickness Calibration Block
Metric Version:
Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps.
Metric Step Face: 25mm x 25mm
Step thickness tolerance: ±0.04mm
Tipsy, Step Block, 1018 Carbon Steel (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
v3 test block 304 stainless steel metric version ndt ut calibration block
V3 Test Block 304 Stainless Steel (Metric Version) (7256)

V3 Test Block 304 Stainless Steel (Metric Version)


For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Includes 25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot.

Made in accordance with NDE Flaw Drawing No. 10250, with design based on prototypes from the I&T Nardoni Institute in Brescia, Italy. 

• Dimensions: 150mm x 90mm tall x 25mm wide
• Made from 304 Stainless Steel (Metric Version) Nickel-plated
V3 Test Block 304 Stainless Steel (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
v3 test block 1018 steel metric version ndt ut calibration block
V3 Test Block Titanium (Metric Version) (7257)

V3 Test Block Titanium (Metric Version)

For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Includes 25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. 

Made in accordance with NDE Flaw Drawing No. 10250, with design based on prototypes from the I&T Nardoni Institute in Brescia, Italy. 

• Dimensions: 150mm x 90mm tall x 25mm wide
• Made from Type Titanium (Metric Version)
V3 Test Block Titanium (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
v3 test block 1018 steel metric version ndt ut calibration block
V3 Test Block, 1018 Steel (Metric Version) (7255)

V3 Test Block 1018 Steel (Metric Version)

For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Includes 25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. 

Made in accordance with NDE Flaw Drawing No. 10250, with design based on prototypes from the I&T Nardoni Institute in Brescia, Italy. 

• Dimensions: 150mm x 90mm tall x 25mm wide
• Made from 1018 Steel (Metric Version)
V3 Test Block 1018 Steel (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
v3 test block 304 stainless steel metric version ndt ut calibration block
V3 Test Block,7075-T6 Aluminum (Metric Version) (7258)

V3 Test Block,7075-T6 Aluminum (Metric Version)

For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Includes 25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. 

Made in accordance with NDE Flaw Drawing No. 10250, with design based on prototypes from the I&T Nardoni Institute in Brescia, Italy. 

• Dimensions: 150mm x 90mm tall x 25mm wide
• 7075-T6 Aluminum (Metric Version)
V3 Test Block,7075-T6 Aluminum (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step Block 304 Stainless Steel (Inch Version) (7232)

VersaTip Step Block 304 Stainless Steel (Inch Version)

VersaTip Thickness Calibration Block
Inch Version:
This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps.
Inch Step Face: 1.00" x 1.00"
Step thickness tolerance: ±0.002"
VersaTip Step Block 304 Stainless Steel (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step Block, 1018 Carbon Steel (Inch Version) (7231)

VersaTip Step Block, 1018 Carbon Steel (Inch Version)

VersaTip Thickness Calibration Block
Inch Version:
This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps.
Inch Step Face: 1.00" x 1.00"
Step thickness tolerance: ±0.002"
VersaTip Step Block, 1018 Carbon Steel (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step block, Block 7075 Aluminum (Inch Version) (7233)

VersaTip Step block, Block 7075 Aluminum (Inch Version)


VersaTip Thickness Calibration Block
Inch Version:
This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps.
Inch Step Face: 1.00" x 1.00"
Step thickness tolerance: ±0.002"
VersaTip Step block, Block 7075 Aluminum (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002" VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
Per Page      91 - 109 of 109