Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
10 step block 1018 carbon steel inch version
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
angle beam block miniature 304 stainless steel
Angle Beam Block (miniature) 304 Stainless Steel Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
ASTM_E317_Block_Figure_1.jpg
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
iiw type 2 block titanium inch version ndt ut calibration block
IIW-Type 2 Block Titanium (Inch Version) A modified version of the original IIW-Type 1 design. Includes a 2.0" radius x .250" deep cut-out superposed on the 4.0" radius for distance calibration. Also includes numbers 3, 5 and 8 through holes (3/64", 5/64" AND 8/64" diameter) for sensitivity testing or surface wave inspection, and distance calibration marks to the 2.0" hole. In accordance with International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1 specifications.
mini angle beam inch aluminum
Mab Mini Angle Beam, Inch, Titanium Block miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam inch aluminum
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam inch aluminum
Mini Angle Beam Block 25mmm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
mini angle beam inch aluminum
Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam, Inch, Stainless Steel Block This miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam metric aluminum
Mini Angle Beam, Metric, Aluminum Block The METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. In accordance with PH Tool drawing No. 10170, a metric equivelant, based on ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 1018 Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut phased array calibration block aluminum 7075 t6 1 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
10 step block 1018 carbon steel inch version
10 Step, Block, Titanium, (Metric 10B) (7018)

10 Step Block Titanium (Metric 10B)

10 Step Calibration Block
The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
angle beam block miniature 304 stainless steel
Angle Beam Block (miniature) 304 Stainless Steel Block (7184)

Angle Beam Block (miniature) 304 Stainless Steel Block


This miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.

In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.

• Dimensions: 1.000" thick.
• Also available in .500" thickness.

Angle Beam Block (miniature) 304 Stainless Steel Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
ASTM_E317_Block_Figure_1.jpg
ASTM E317, Block, Figure 1, 7075-T6 Aluminum (Inch Version) (7103)

ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version)

Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
In accordance with ASTM E317 Figure 1.
ASTM E317 horizontal and vertical linearity block, Figure 1 is used for evaluating the horizontal and vertical linearity characteristics of ultrasonic pulse-echo systems.
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing, Block, 304 Stainless Steel (7152)

EDM Slot Sizing Block 304 Stainless Steel

Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block.
Dimensions: 1.000" x 1.000" x 10.000".
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
iiw type 2 block titanium inch version ndt ut calibration block
IIW-Type 2 Block, Titanium (Inch Version) (7160)

IIW-Type 2 Block, Titanium (Inch Version)

A modified version of the original IIW-Type 1 design. Includes a 2.0" radius x .250" deep cut-out superposed on the 4.0" radius for distance calibration. Also includes numbers 3, 5 and 8 through holes (3/64", 5/64" AND 8/64" diameter) for sensitivity testing or surface wave inspection, and distance calibration marks to the 2.0" hole. In accordance with International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1 specifications.

• Dimensions: 12.0" x 4.0" x 1.0"

• Titanium (Inch Version)
IIW-Type 2 Block Titanium (Inch Version) A modified version of the original IIW-Type 1 design. Includes a 2.0" radius x .250" deep cut-out superposed on the 4.0" radius for distance calibration. Also includes numbers 3, 5 and 8 through holes (3/64", 5/64" AND 8/64" diameter) for sensitivity testing or surface wave inspection, and distance calibration marks to the 2.0" hole. In accordance with International Institute of Welding, ASTM E164 and U.S. Air Force NDI Manual T.O. 33B-1-1 specifications.
mini angle beam inch aluminum
Mab Mini Angle Beam, Inch, Titanium Block (7185)

Mab Mini Angle Beam, Inch, Titanium Block

miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.

• Dimensions: 1.000" thick.
• Also available in .500" thickness.
Mab Mini Angle Beam, Inch, Titanium Block miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam inch aluminum
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) (7234)

Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) (7235)

Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) (7236)

Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam inch aluminum
Mini Angle Beam Block 25mm 1018 Steel (Inch Version) (7240)

Mini Angle Beam Block 25mmm 1018 Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) (7237)

Mini Angle Beam Block 25mm 1018 Steel (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Inch Version) (7241)

Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) (7238)

Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) (7239)

Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
mini angle beam inch aluminum
Mini Angle Beam Block, 25mm. 7075-T6 Aluminum (Inch Version) (7242)

Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version)

Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam, Inch, Stainless Steel Block (7190)

Mini Angle Beam, Inch, Stainless Steel Block


This miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.

• Dimensions: 1.000" thick.
• Also available in .500" thickness.
Mini Angle Beam, Inch, Stainless Steel Block This miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam metric aluminum
Mini Angle Beam, Metric, Aluminum Block (7191)

Mini Angle Beam, Metric, Aluminum Block

The METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with PH Tool drawing No. 10170, a metric equivelant, based on ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Block measures 25 mm thick and contains a 25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).

• Dimensions: 25 mm thick.
Mini Angle Beam, Metric, Aluminum Block The METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. In accordance with PH Tool drawing No. 10170, a metric equivelant, based on ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block, 304 Stainless Steel (Metric Version) (7416)

PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675, Block 7075-T6 Aluminum (Metric Version) (7417)

PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW, ISO 19675, Block, 1018 Steel (Metric Version) NDT PAUT Calibration Block (7415)

PAUT IIW ISO 19675 Block 1018 Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 1018 Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut phased array calibration block aluminum 7075 t6 1 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) NDT PAUT Calibration Block (7448)
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) NDT PAUT Calibration Block (7451)

PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) NDT PAUT Calibration Block (7452)

PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2-3/4" Thick) NDT PAUT Calibration Block (7453)

PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
Per Page      1 - 24 of 24
  • 1