Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
10 step block 1018 carbon steel inch version
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
angle beam block miniature 304 stainless steel
Angle Beam Block (miniature) 304 Stainless Steel Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½", 7075-T6 Aluminumm Geometry: contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½”, 1018 Steel Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½”, 304 Stainless Steel Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic ½" Block 7075-T6 Aluminum (long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 1½" Block 1018 Steel (long version) Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 1½" Block 1018 Steel Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 1½" Block 304 Stainless Steel (long version) long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration, 1½" Block, 7075-T6 Aluminum (long version) long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic ½" Block 304 Stainless Steel ( long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic, Calibration 1½" Block 7075-T6 Aluminum Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
ASTM_E317_Block_Figure_1.jpg
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
NDE TECH offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our NDT Standard Calibration Blocks, please contact us at + 91-9043-660-755 or send an email to info@ndeflawtechnologies.com hashtag#welding hashtag#calibration hashtag#demonstration and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 304 Stainless Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 7075 Aluminum AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block Titanium AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block, 1018 Carbon Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
eddy current tube standard iris
Internal Rotary Inspection System Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
mini angle beam inch aluminum
Mab Mini Angle Beam, Inch, Titanium Block miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam inch aluminum
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam inch aluminum
Mini Angle Beam Block 25mmm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
mini angle beam inch aluminum
Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
10 step block 1018 carbon steel inch version
10 Step, Block, Titanium, (Metric 10B) (7018)

10 Step Block Titanium (Metric 10B)

10 Step Calibration Block
The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
angle beam block miniature 304 stainless steel
Angle Beam Block (miniature) 304 Stainless Steel Block (7184)

Angle Beam Block (miniature) 304 Stainless Steel Block


This miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.

In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.

• Dimensions: 1.000" thick.
• Also available in .500" thickness.

Angle Beam Block (miniature) 304 Stainless Steel Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½", 7075-T6 Aluminum NDT Calibration Block (7279)

ASME Basic Cal Block, ½", 7075-T6 Aluminum

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 4½" long
  • Material: 7075-T6 Aluminum
ASME Basic Cal Block, ½", 7075-T6 Aluminumm Geometry: contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½”, 1018 Steel NDT Calibration Block (7282)

ASME Basic Cal Block, ½”, 1018 Steel

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 4½" long
  • Material: 1018 Steel
ASME Basic Cal Block, ½”, 1018 Steel Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½”, 304 Stainless Steel NDT Calibration Block (7281)

ASME Basic Cal Block, ½”, 304 Stainless Steel

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 4½" long
  • Material: Type 304 Stainless Steel
ASME Basic Cal Block, ½”, 304 Stainless Steel Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic cal ½" Block 7075-T6 Aluminum (long version) NDT Calibration Block (7280)

ASME Basic cal ½" Block 7075-T6 Aluminum (long version)

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 6" long
  • Material: 7075-T6 Aluminum
ASME Basic ½" Block 7075-T6 Aluminum (long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 1½" Block 1018 Steel (long version) NDT Calibration Block (7260)

ASME Basic Calibration 1½" Block 1018 Steel (long version)

Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 1½" thick x 6¼" wide x 12" long
  • Material: 304 Stainless Steel
ASME Basic Calibration 1½" Block 1018 Steel (long version) Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 1½" Block 1018 Steel NDT Calibration Block (7259)

ASME Basic Calibration 1½" Block 1018 Steel

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 1½" thick x 6¼" wide x 4½"
  • Material: 1018 Steel
ASME Basic Calibration 1½" Block 1018 Steel Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 1½" Block 304 Stainless Steel (long version) NDT Calibration Block (7262)

ASME Basic Calibration 1½" Block 304 Stainless Steel (long version)

Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 1½" thick x 6¼" wide x 12" long
  • Material: Type 304 Stainless Steel
ASME Basic Calibration 1½" Block 304 Stainless Steel (long version) long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration, 1½" Block, 7075-T6 Aluminum (long version) NDT Calibration Block (7264)

ASME Basic Calibration, 1½" Block, 7075-T6 Aluminum (long version)

Special long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 1½" thick x 6¼" wide x 12"
  • Material: 7075-T6 Aluminum
ASME Basic Calibration, 1½" Block, 7075-T6 Aluminum (long version) long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic ½" Block 304 Stainless Steel (long version) NDT Calibration Block (7278)

ASME Basic ½" Block 304 Stainless Steel (long version)

long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 6" long
  • Material: Type 304 Stainless Steel
ASME Basic ½" Block 304 Stainless Steel ( long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic, Calibration 1½" Block 7075-T6 Aluminum NDT Calibration Block (7263)

ASME Basic, Calibration 1½" Block 7075-T6 Aluminum

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 1½" thick x 6¼" wide x 4½" long
  • Material: 7075-T6 Aluminum
ASME Basic, Calibration 1½" Block 7075-T6 Aluminum Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 1/8" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
ASTM_E317_Block_Figure_1.jpg
ASTM E317, Block, Figure 1, 7075-T6 Aluminum (Inch Version) (7103)

ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version)

Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
In accordance with ASTM E317 Figure 1.
ASTM E317 horizontal and vertical linearity block, Figure 1 is used for evaluating the horizontal and vertical linearity characteristics of ultrasonic pulse-echo systems.
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
Cladding Weld Overlay NDT CALIBRATION BLOCKS
NDE TECH offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our NDT Standard Calibration Blocks, please contact us at + 91-9043-660-755 or send an email to info@ndeflawtechnologies.com hashtag#welding hashtag#calibration hashtag#demonstration and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
NDE TECH offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our NDT Standard Calibration Blocks, please contact us at + 91-9043-660-755 or send an email to info@ndeflawtechnologies.com hashtag#welding hashtag#calibration hashtag#demonstration and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 304 Stainless Steel (7140)

DS Calibration Block 304 Stainless Steel

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block 304 Stainless Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 7075 Aluminum (7141)

DS Calibration Block 7075 Aluminum

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block 7075 Aluminum AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block Titanium (7142)

DS Calibration Block Titanium

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block Titanium AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block, 1018 Carbon Steel (7139)

DS Calibration Block, 1018 Carbon Steel

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements.
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block, 1018 Carbon Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing, Block, 304 Stainless Steel (7152)

EDM Slot Sizing Block 304 Stainless Steel

Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block.
Dimensions: 1.000" x 1.000" x 10.000".
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
eddy current tube standard iris
ET Calibration Tube Standards

Internal Rotary Inspection System Tube

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

IRIS

Comments

Heat Exchangers

Nonferromagnetic material Stainless steel, Cu/Ali

X

– ECT is the recommended choice for its speed and accuracy.- IRIS can sometimes be used to confirm the sizing of ID defects.

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.

Ferromagnetic material Carbon steel, nickel. Typical defects are pitting and corrosion.

X

– RFT, MFL, and IRIS are good, and most of the time complementary.

Air Coolers

Carbon steel tube with aluminum fins Typical defects are ID pitting and OD wear close to the water box.

X

– RFT is not effective because the fins disturb the remote field.- MFL is quick and sensitive but does not allow sizing.- IRIS is often used to back up MFL but has difficulty with OD flaws.

Boilers

Carbon steel tube Typical defects are pitting, wear, and cracking at the tube sheet.

X

– RFT is good for wear detection and can easily pass the bend.- MFL is good only on straight boiler tubes without swages.- IRIS is good for wear and pits but has no sensitivity in the bend.

Internal Rotary Inspection System Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
mini angle beam inch aluminum
Mab Mini Angle Beam, Inch, Titanium Block (7185)

Mab Mini Angle Beam, Inch, Titanium Block

miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.

• Dimensions: 1.000" thick.
• Also available in .500" thickness.
Mab Mini Angle Beam, Inch, Titanium Block miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
mini angle beam inch aluminum
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) (7234)

Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 1018 Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) (7235)

Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 304 Stainless Steel (Inch Version) Geometry:1.0&quot; radius opposite a 2.0&quot; radius, and a 5/64&quot; diameter x .375&quot; deep flat-bottom hole. Dimensions: 1.000&quot; thick. (also available in .500&quot; thickness, see here)
mini angle beam block 25mm 7075 t6 aluminum paut notch block ndt calibration blockspaut phased array calibration standard ndt calibration blocksphased array
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) (7236)

Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole.
Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications.
Mini Angle Beam Block 12.5mm 7075-T6 Aluminum (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .375" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
mini angle beam inch aluminum
Mini Angle Beam Block 25mm 1018 Steel (Inch Version) (7240)

Mini Angle Beam Block 25mmm 1018 Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm 1018 Steel (Inch Version) Geometry:1.0&quot; radius opposite a 2.0&quot; radius, and a 5/64&quot; diameter x .750&quot; deep flat-bottom hole. Dimensions: 1.000&quot; thick. (also available in .500&quot; thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) (7237)

Mini Angle Beam Block 25mm 1018 Steel (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 1018 Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Inch Version) (7241)

Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version)


Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm 304 Stainless Steel (Inch Version) Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) (7238)

Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 304 Stainless Steel (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
angle beam block miniature 304 stainless steel
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) (7239)

Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version)


Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm thick.METRIC miniature angle beam block is also known as a "Rompas" block or simply "Angle Beam". It is a substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with a metric equivelant, based on ASTM E164 and U.S.
Mini Angle Beam Block 25mm 7075-T6 Aluminum (Metric Version) Geometry:25 and 50 mm radius, and a 2 mm FBH at 6.25 mm metal travel distance (1/4T).Dimensions: 25 mm
mini angle beam inch aluminum
Mini Angle Beam Block, 25mm. 7075-T6 Aluminum (Inch Version) (7242)

Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version)

Geometry:1.0" radius opposite a 2.0" radius, and a 5/64" diameter x .750" deep flat-bottom hole. Dimensions: 1.000" thick. (also available in .500" thickness, see here)
This Miniature Angle Beam Block is also known as a "Rompas" block or simply "Angle Beam," and it is the ASTM and U.S. Air Force substitute for the DSC block for distance, beam index, refracted angle and sensitivity calibration.
In accordance with ASTM E164 and U.S. Bureau of Public Roads, Type B specifications
Mini Angle Beam Block 25mmm. 7075-T6 Aluminum (Inch Version) Geometry:1.0&quot; radius opposite a 2.0&quot; radius, and a 5/64&quot; diameter x .750&quot; deep flat-bottom hole. Dimensions: 1.000&quot; thick. (also available in .500&quot; thickness, see here)
Per Page      1 - 30 of 40