# Search

#### Search Criteria

#### Products meeting the search criteria

## 3-Notch Eddy Current Standard Block (Titanium)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (7075-T6 Aluminum)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (17-4PH Stainless Steel)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (17-7 Stainless Steel)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block 2024-T3 Aluminum

3 Notch Eddy Current Standard Block 2024 T3 AluminumGeometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (2214-T6 Aluminum)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (309 Stainless Steel)

3-Notch Eddy Current Standard BlockGeometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (347 Stainless Steel)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (Alloy 718)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (Copper 110)

3-Notch Eddy Current Standard (Copper 110)Geometry:co0ntains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (Magnesium)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (Nickel 200)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (316 Stainless Steel)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (Alloy 600)

3-Notch Eddy Current Standard Block (Alloy 600)Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (4340 Steel)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.Dimensions: .250" x 1.0" x 3.0"

## 3-Notch Eddy Current Standard Block (304 Stainless Steel)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.

Dimensions: .250" x 1.0" x 3.0"

## DAC GSET Eddy Current Standard Block 7075-T6 Aluminum

Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" long

bare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius

Part No: AL.01

Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

Reference Standard DAC GSET AL.01 from McDonnell Douglas NDT Manual 06-20-01.

## DAC GSET Eddy Current Standard Block 1018 Steel

Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" longbare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius

Part No: AL.01

Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

Reference Standard DAC GSET AL.01 from McDonnell Douglas NDT Manual 06-20-01.

## DAC GSET Eddy Current Standard Block Titanium

Geometry: Overall dimensions: .250/.625" thick x 2.000" wide x 6.375" longbare Contains: (2) fastener holes, (11) EDM notches, (1) end with a .250" radius

Part No: AL.01

Manufactured IAW McDonnell Douglas NDT Manual 06-20-01, Pages F1 to F3, Figure 1.

Reference Standard DAC GSET AL.01 from McDonnell Douglas NDT Manual 06-20-01.

## EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATIONTubes in each bundle

3 No’s Cupro-Nickel bundles for training

3 No’s Aluminum Brass bundles for training

6 No’s Cupro-Nickel bundles for examinations

6No’s Aluminum Brass bundles for examinations

Materials:

1. Amplitude analysis test – 70/30 cupro-nickel of the following composition.

Cu 66%; Ni 30%; Fe 2%; Mn 2%

2. Phase analysis test – Brass tubing of the following composition.

Cu 76%; Al 2%; As 0.04%; Zn reminder

Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.

## Eddy Current Weld Specimen Cruciform

ET Weld Specimen Specially made forSurface Eddy Current Testing with

embedded flaws & coated with primer,

epoxy paint & Teflon,

L300 X W200 X H100 X T15

## Navy Eddy Current Standard Block 7075-T651/T73 Aluminum

Geometry: Overall Dimensions: .875" thick x 4.0" wide x 7.0" longAlloy: 7075-T6 Aluminum (top and middle layer) and 7075-T73 (bottom later), anodized

(20) Fastener Holes from .156 to .750" diameter.

(40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch

All EDM notches are .004 ± .001 wide

Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.

P/N NRK-3A.

Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.

## Navy Eddy Current Standard Block Titanium

Geometry: Overall Dimensions: .875" thick x 4.0" wide x 7.0" longAlloy: Titanium (top and middle layer) and 7075-T73 (bottom later), anodized

(20) Fastener Holes from .156 to .750" diameter.

(40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch

All EDM notches are .004 ± .001 wide

Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.

P/N NRK-3A.

Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.

## Navy Eddy Current Standard Block 1018 Steel

Geometry: Overall Dimensions: .875" thick x 4.0" wide x 7.0" longAlloy: 1018 Steel (top and middle layer) and 7075-T73 (bottom later), anodized

(20) Fastener Holes from .156 to .750" diameter.

(40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch

All EDM notches are .004 ± .001 wide

Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.

P/N NRK-3A.

Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.

## USAF General Purpose Eddy Current Standard Block, 1018 Steel

Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.

- Overall Dimensions: .875" thick x 4.0" wide x 7.0" long
- Alloy: 6AL-4V Titanium
- (20) Fastener Holes from .156 to .750" diameter.
- (40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch
- All EDM notches are .004 ± .001 wide
- Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.
- P/N NRK-3T

## USAF General Purpose Eddy Current Standard Block, Titanium

Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.

- Overall Dimensions: .875" thick x 4.0" wide x 7.0" long
- (20) Fastener Holes from .156 to .750" diameter.
- (40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch
- All EDM notches are .004 ± .001 wide
- Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.
- P/N NRK-3X
- Optional Wooden Case
- Alloy: Test blocks are available in special and exotic alloys. Blocks can be machined in Titanium alloys, Inconel and other Nickel alloys, Alloy Steels, Stainless Steels, Aluminum, Copper-Nickels, Brasses, Cast Irons, refractory alloys such as Molybdenum and Tungsten, and many more. Let us build your next special alloy test block!

## USAF, General Purpose, Eddy Current Standard Block, 304 Stainless Steel

Navy Universal Eddy Current Standard. A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.- Overall Dimensions: .875" thick x 4.0" wide x 7.0" long
- Alloy: 7075-T6 Aluminum (top and middle layer) and 7075-T73 (bottom later), anodized
- (20) Fastener Holes from .156 to .750" diameter.
- (40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch
- All EDM notches are .004 ± .001 wide
- Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.
- P/N NRK-3A

- 1