Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (Alloy 718) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
eddy current tube standard ect
Eddy Current Tube Standard ECT Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
eddy current tube standards ndt calibration block
Eddy Current Tube Standards Block Ready to request a quote for a standard? What is the material? Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? Is there a specification the standard needs to comply with? If you have a drawing, or even a simple hand sketch?
et weld specimen cruciform
Eddy Current Weld Specimen Cruciform ET Weld Specimen Specially made for Surface Eddy Current Testing with embedded flaws & coated with primer, epoxy paint & Teflon, Crciform Type Joint L300 X W200 X H100 X T15
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (Alloy 718) NDT ET Calibration Block (7389)

3-Notch Eddy Current Standard Block (Alloy 718)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.
Dimensions: .250" x 1.0" x 3.0"
3-Notch Eddy Current Standard Block (Alloy 718) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION (7455)

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION 
Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles
3 No’s Cupro-Nickel bundles for training
3 No’s Aluminum Brass bundles for training
6 No’s Cupro-Nickel bundles for examinations
6No’s Aluminum Brass bundles for examinations
Materials:
1. Amplitude analysis test – 70/30 cupro-nickel of the following composition.
Cu 66%; Ni 30%; Fe 2%; Mn 2%
2. Phase analysis test – Brass tubing of the following composition.
Cu 76%; Al 2%; As 0.04%; Zn reminder
Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
eddy current tube standard ect
Eddy Current Tube Standard ECT

Eddy Current Tube Standard ECT

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

ECT

Comments

Condensers

Nonferromagnetic material Generally, thin tubes made of brass, aluminum brass, cupronickel, or titanium.

X

– ECT is the recommended choice for its speed and its accuracy.

Air Conditioners

Copper with low profile OD fins Typical problem is circumferential cracking and wear in the land area.

X

– ECT inspection with special probes to detect circumferential cracks.  These probes are normally called AC probes.

Heat Exchangers

Nonferromagnetic material Stainless steel, Cu/Ali

X

– ECT is the recommended choice for its speed and accuracy.- IRIS can sometimes be used to confirm the sizing of ID defects.

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.

Eddy Current Tube Standard ECT Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards For Tube Inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards For Tube Inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
EDDY CURRENT TUBE STANDARDS Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
eddy current tube standards ndt calibration block
Eddy Current Tube Standards Block (7454)

Eddy Current Tube Standards Block

Ready to request a quote for a standard? Here's what we need...
What is the material? (Alloy, OD and Wall)
Is NDE supplying the material or will it be customer supplied?
What defects are needed and what size? (most depths are given in % of tube wall)
Is there a specification the standard needs to comply with? (ASME, etc.)
If you have a drawing or even a simple hand sketch, please send that along as well.

We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards Block Ready to request a quote for a standard? What is the material? Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? Is there a specification the standard needs to comply with? If you have a drawing, or even a simple hand sketch?
et weld specimen cruciform
Eddy Current Weld Specimen Cruciform

Eddy Current Weld Specimen Cruciform

ET Weld Specimen Specially made for
Surface Eddy Current Testing with
embedded flaws &amp; coated with primer,
epoxy paint &amp; Teflon, Crciform Type Joint
L300 X W200 X H100 X T15
Eddy Current Weld Specimen Cruciform ET Weld Specimen Specially made for Surface Eddy Current Testing with embedded flaws & coated with primer, epoxy paint & Teflon, Crciform Type Joint L300 X W200 X H100 X T15
Per Page      1 - 12 of 12
  • 1