Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut notch block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Notch Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 1 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
paut phased array calibration standard block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Inch Version) Geometry:The three radii (.500", 1.000" and 2.000") allow for exit point verification, velocity and sound path calculations. This block contains five holes at 3/64" diameter drilled through the 1.000" width, located at .100", .200", .400", .600", .800", 1.200", 1.400", 1.600", 1.800" and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0"
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) Geometry:The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface. Dimensions: 450mm x 50mm x 25mm
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 7075 Aluminum (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 7075 Aluminum (Inch Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
thin step block 1018 steel inch version ndt calibration block
Thin Step Block 7075 Aluminum (Metric Version) Thin Step Calibration Block for thickness and linearity calibration. Metric Version: Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm) Step Face - Metric Version - 20mm x 20mm
thin step block 1018 steel inch version ndt calibration block
Thin Step Block-7075 Aluminum (Inch Version) Thin Step Calibration Block for thickness and linearity calibration. Inch Version: The Thin Step Calibration Block has steps of 0.040, 0.060, 0.080 and 0.100 inches. Step Face - Inch Version: 3/4" x 3/4".
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy Block 7075 Aluminum (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
usaf general purpose eddy current standard block 304 stainless steel ndt et calibration block
USAF General Purpose Eddy Current Standard Block 7075-T6 Aluminum Geometry: Overall Dimensions: 1.06" thick x 4.0" wide x 7.0" long Alloy: 7075-T6 Aluminum, clear anodized (20) Fastener Holes from .156 to .750" diameter. (40) Corner notches, (20) Bore notches, (4) Surface notches (1) Tapered notch, (1) Radius notch All EDM notches are .004 ± .001 wide Finished standard is anodized per MIL-A-8625 Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-39. NSN 6635-01-092-5129 and P/N 7947479-10.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 7075-T6 Aluminum (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Calibration Block 7075-T6 Aluminum (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v15 block 7075 t6 aluminum a2 ndt ut calibration block
V1/5 Block, 7075-T6 Aluminum (A2) Block Geometry:100mm radius, 1.5mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. Dimensions: 300mm x 100mm x 25mm
v3 test block 304 stainless steel metric version ndt ut calibration block
V3 Test Block,7075-T6 Aluminum (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step block, Block 7075 Aluminum (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002" VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version) (7423)

PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version)

Geometry: The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm.
Dimensions: 30mm wide x 75mm tall x 300mm long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 7075-T6 Aluminum (Metric Version) Geometry:The block contains four holes at 1.2mm diameter drilled through the 30mm width. The holes are located at 6.25mm (68.75mm), 18.75mm (56.25mm), 31.25mm, and 43.75mm. Dimensions: 30mm wide x 75mm tall x 300mm long.
paut navships test block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Navships Test Block, 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7422)

PAUT-Navships Test Block 7075-T6 Aluminum (Inch Version)

Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
This special Phased Array version of the popular NAVSHIPS block solves the problem of too many holes interfering with one another.
PAUT-Navships Test Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four holes at 3/64" diameter drilled through the 1.250" width. The holes are located at .250, .750, 1.250, 1.750, 2.250, and 2.750".Dimensions: 1.250" wide x 3.000" tall x 12.00" long.
paut notch block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Notch Block 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7432)

PAUT-Notch Block 7075-T6 Aluminum (Inch Version)

Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000".
Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
The Phased Array Calibration Standard Notch Block has been specially designed for use with Phased Array instruments used for sizing of OD and ID-connected cracks.
PAUT-Notch Block 7075-T6 Aluminum (Inch Version) Geometry:The block contains four EDM slots at depths of 20, 40, 60, and 80% and a width of .031". Standard thickness is 1.000". Dimensions: 1.000" thick x 2.000" wide x 7.00" long.
paut phased array calibration block aluminum 7075 t6 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) NDT PAUT Calibration Block (7447)
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T. This block is designed to reduce echo interference when performing a DAC/TCG calibration. The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted. A 150° angle has also been machined into the block ends to diminish corner reflections. As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6 inches.
PAUT-Phased Array calibration block Aluminum 7075-T6 ( ¾" Thick) ASME Sec V Art 4 Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T.
paut phased array calibration block aluminum 7075 t6 1 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (1½" Thick,) NDT PAUT Calibration Block (7450)
PAUT-Phased Array calibration block Aluminum 7075-T6 (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
PAUT-Phased Array calibration block Aluminum 7075-T6 (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2-3/4" Thick) NDT PAUT Calibration Block (7453)

PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
paut phased array calibration standard block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7438)

PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Inch Version)

Geometry:The three radii (.500", 1.000" and 2.000") allow for exit point verification, velocity and sound path calculations. This block contains five holes at 3/64" diameter drilled through the 1.000" width, located at .100", .200", .400", .600", .800", 1.200", 1.400", 1.600", 1.800" and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0"
Phased Array Calibration Standard Blocks are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Inch Version) Geometry:The three radii (.500", 1.000" and 2.000") allow for exit point verification, velocity and sound path calculations. This block contains five holes at 3/64" diameter drilled through the 1.000" width, located at .100", .200", .400", .600", .800", 1.200", 1.400", 1.600", 1.800" and 1.900" from the respective scanning surface.Dimensions: 18.0" x 2.0" x 1.0"
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) NDT PAUT Calibration Block (7439)
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) Geometry:The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface. Dimensions: 450mm x 50mm x 25mm Phased Array Calibration Standard Blocks are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".
PAUT-Phased Array Calibration Standard Block 7075-T6 Aluminum (Metric Version) Geometry:The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface. Dimensions: 450mm x 50mm x 25mm
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Inch Version) NDT PAUT Calibration Block (7443)

PAUT-Type A Block 7075-T6 Aluminum (Inch Version)

PAUT-Type A Block 7075-T6 Aluminum (Inch Version) 
Geometry:4.000" and 2.000" radii
19 through holes at .040" diameter
1 through hole at .080" diameter
4 FBHs at .080" diameter x .080", .160", .235" and .315" deep.
4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep.
3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius.
4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long.
Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 7075-T6 Aluminum (Inch Version) Geometry:4.000" and 2.000" radii 19 through holes at .040" diameter 1 through hole at .080" diameter 4 FBHs at .080" diameter x .080", .160", .235" and .315" deep. 4 FBHs at .157" diameter x .040", .120", .200" abd .275" deep. 3 FBHs at .080" diameter x .120" deep machined into the 2.000" radius. 4 EDM notches at .004", .008", .012" and .016" deep x .020" wide x 1.00" long. Dimensions: 1.000" thick x 4.000" tall x 12.00" long.
paut type block 7075 t6 aluminum inch version ndt paut calibration block
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) NDT PAUT Calibration Block (7444)

PAUT-Type A Block 7075-T6 Aluminum (Metric Version)

Geometry:100.0 mm and 50.0m radii
19 through holes at 1.0mm diameter
1 through hole at 2.0mm diameter
4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep
4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep
3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius
4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long.
Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.
PAUT-Type A Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm and 50.0m radii 19 through holes at 1.0mm diameter 1 through hole at 2.0mm diameter 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long. Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block 7075 Aluminum, (Metric Version) (7217)

SC Block 7075 Aluminum (Metric Version)


AWS Type SC Calibration Block is Sensitivity Reference Block.
Geometry:062" diameter through holes.
3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.

AWS-type block used for shear wave sensitivity calibration.
• Metric version
SC Block 7075 Aluminum (Metric Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
sc block 7075 aluminumtipsy step blocks ndt ut tipsy step block tipsy step block metric tipsy step block inch tipsy blocksv1 block calibration v2 calibration block v2 block calibration block ultrasonic testing ndt angle beam block
SC Block, 7075 Aluminum (Inch Version) (7216)

SC Block 7075 Aluminum (Inch Version)

AWS Type SC Calibration Block is Sensitivity Reference Block.
Geometry:062" diameter through holes.
3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.

AWS-type block used for shear wave sensitivity calibration.
• Metric version
SC Block 7075 Aluminum (Inch Version) AWS Type SC Calibration Block is Sensitivity Reference Block. Geometry:062" diameter through holes. 3.000" x 1.250" x .905" In accordance with ASTM E164 and BRR/AWS requirements.
thin step block 1018 steel inch version ndt calibration block
Thin Step Block 7075 Aluminum (Metric Version) (7224)

Thin Step Block 7075 Aluminum (Metric Version)

Thin Step Calibration Block for thickness and linearity calibration.
Metric Version:
Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm)
Step Face - Metric Version - 20mm x 20mm
Thin Step Block 7075 Aluminum (Metric Version) Thin Step Calibration Block for thickness and linearity calibration. Metric Version: Metric Thin Step (1.0, 1.5, 2.0 and 2.5 mm) Step Face - Metric Version - 20mm x 20mm
thin step block 1018 steel inch version ndt calibration block
Thin Step, Block-7075 Aluminum (Inch Version) (7227)

Thin Step Block-7075 Aluminum (Inch Version)

Thin Step Calibration Block for thickness and linearity calibration.
Inch Version:
The Thin Step Calibration Block has steps of 0.040, 0.060, 0.080 and 0.100 inches.
Step Face - Inch Version: 3/4" x 3/4".
Thin Step Block-7075 Aluminum (Inch Version) Thin Step Calibration Block for thickness and linearity calibration. Inch Version: The Thin Step Calibration Block has steps of 0.040, 0.060, 0.080 and 0.100 inches. Step Face - Inch Version: 3/4" x 3/4".
versatip block 1018 carbon steel inch version ndt calibration block
Tipsy Step Block, 7075 Aluminum (Metric Version) (7230)

Tipsy Step Block, 7075 Aluminum (Metric Version)

Tipsy Thickness Calibration Block
Metric Version:
Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps.
Metric Step Face: 25mm x 25mm
Step thickness tolerance: ±0.04mm
Tipsy Block 7075 Aluminum (Metric Version) Tipsy Thickness Calibration Block Metric Version: Set this block down on one side and get the 25.0mm, 50.0mm, 75.0mm and 100.0mm steps. Then tip it over and you get the 37.5mm, 62.5mm, 87.5mm and 112.5mm steps. Metric Step Face: 25mm x 25mm Step thickness tolerance: ±0.04mm
usaf general purpose eddy current standard block 304 stainless steel ndt et calibration block
USAF General Purpose Eddy Current, Standard Block, 7075-T6 Aluminum NDT ET Calibration Block (7407)

USAF General Purpose Eddy Current, Standard Block, 7075-T6 Aluminum


Navy Universal Eddy Current Standard.  A (3) plate assembly containing (20) fastener holes with a total of (71) EDM notches in various locations.
  • Overall Dimensions:  .875" thick x 4.0" wide x 7.0" long
  • Alloy:  4340 Steel, bare
  • (20) Fastener Holes from .156 to .750" diameter.
  • (40) Corner notches, (20) Bore notches, (9) Surface notches, (1) Tapered notch, (1) Radius notch
  • All EDM notches are .004 ± .001 wide
  • Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-40.
  • P/N NRK-3S
USAF General Purpose Eddy Current Standard Block 7075-T6 Aluminum Geometry: Overall Dimensions: 1.06" thick x 4.0" wide x 7.0" long Alloy: 7075-T6 Aluminum, clear anodized (20) Fastener Holes from .156 to .750" diameter. (40) Corner notches, (20) Bore notches, (4) Surface notches (1) Tapered notch, (1) Radius notch All EDM notches are .004 ± .001 wide Finished standard is anodized per MIL-A-8625 Manufactured IAW U.S.A.F. Tech Order 33B-1-1, Figure 4-39. NSN 6635-01-092-5129 and P/N 7947479-10.
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 7075-T6 Aluminum (12.5mm) (7251)

V-2 Block 7075-T6 Aluminum (12.5mm)

25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 25mm
• Made from carbon steel.
• Also available in 12.5mm and 20mm thicknesses
V-2 Calibration Block 7075-T6 Aluminum (12.5mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 12.5mm
v 2 calibration block 304 stainless steel 25mm ndt ut calibration block
V-2 Block 7075-T6 Aluminum (25mm) (7252)

V-2 Block 7075-T6 Aluminum (25mm)

25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain. Includes a 25mm and 50 mm radius, 1.5mm hole (or 5mm), engraved reference mark scales from 35 to 75 degrees. In accordance with British Standard BS 2704 block A4, Fig. 4, and AS 2083.
• Dimensions: 75mm x 43mm x 25mm
• Made from stainless steel.
• Also available in 12.5mm and 20mm thicknesses
V-2 Calibration Block 7075-T6 Aluminum (25mm) Angle Beam Calibration V2 (A4) Calibration Block Geometry:75mm x 43mm x 25mm
v15 block 7075 t6 aluminum a2 ndt ut calibration block
V1/5 Block, 7075-T6 Aluminum (A2) Block (7245)

V1/5 Block, 7075-T6 Aluminum (A2) Block

Geometry:100mm radius, 1.5mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
Dimensions: 300mm x 100mm x 25mm
In accordance with British Standard BS 2704 Block A2 Mod. 1, German Standard DIN 54-120, Australian Standard AS 2803, and ISO 2400.
V1/5 Block, 7075-T6 Aluminum (A2) Block Geometry:100mm radius, 1.5mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. Dimensions: 300mm x 100mm x 25mm
v3 test block 304 stainless steel metric version ndt ut calibration block
V3 Test Block,7075-T6 Aluminum (Metric Version) (7258)

V3 Test Block,7075-T6 Aluminum (Metric Version)

For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. This block is intended to function as a more compact and light-weight alternative to V1 or IIW-Type Test Blocks. Includes 25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. 

Made in accordance with NDE Flaw Drawing No. 10250, with design based on prototypes from the I&T Nardoni Institute in Brescia, Italy. 

• Dimensions: 150mm x 90mm tall x 25mm wide
• 7075-T6 Aluminum (Metric Version)
V3 Test Block,7075-T6 Aluminum (Metric Version) Geometry:25mm, 50mm, and 100mm radii, (2) 3.0mm diameter through holes, engraved reference mark scales, and a 0.4mm wide x 2.5mm deep slot. Dimensions: 150mm x 90mm tall x 25mm wide
versatip block 1018 carbon steel inch version ndt calibration block
VersaTip Step block, Block 7075 Aluminum (Inch Version) (7233)

VersaTip Step block, Block 7075 Aluminum (Inch Version)


VersaTip Thickness Calibration Block
Inch Version:
This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps.
Inch Step Face: 1.00" x 1.00"
Step thickness tolerance: ±0.002"
VersaTip Step block, Block 7075 Aluminum (Inch Version) VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002" VersaTip Thickness Calibration Block Inch Version: This versatile block contains eight (8) steps. Set it down on one side and get the 1.0", 2.0", 3.0" and 4.0" steps. Then tip it over and get the 1.5", 2.5", 3.5" and 4.5" steps. Inch Step Face: 1.00" x 1.00" Step thickness tolerance: ±0.002"
Per Page      91 - 111 of 111