Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
10 step block 7075 aluminum metric 10b ndt utg calibration block
10 Step Block 7075 Aluminum (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
10 step block 1018 carbon steel inch version
10 Step Block 7075 Aluminum-(Metric 10A) 10 Step Calibration Block Metric 1 Type: The Metric 10A- 10 Step Calibration Block has steps starting at 2.0mm to 20.0mm in 2.0mm increments. Metric Step Face: 20mm x 20mm
10 step block 1018 carbon steel inch version
10 Step Block-7075 Aluminum (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"
12 hole 15 notch general purpose eddy current bolt hole standard block 7075 t6 aluminum ndt calibration block
Geometry: Block Sizes: 0.25" thick x 2.5" x 6.0" Holes: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4" diameter Surface Notches: Qty 3 @ .008", .020" and .040" deep x 1.0" long Notch Width (All): .004" (± .001) Hole Notch Configurations: (1) .030" x .030" (45°) corner notch @ .004" wide in each hole (Qty 12) (1) .020" full-bore (thru) notch @ .004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ .020" deep x .004" wide and (1) .030" x .030" (45°) corner notch @ .004" in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ .030" deep x .004" wide x .060" long in each hole - (Qty 12)
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (7075-T6 Aluminum) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (2024-T3 Aluminum) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (2214-T6 Aluminum) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Block 1018 Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ndt_30_FBH_Resolution_Block
30 FBH Resolution Block 304 Stainless Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
30_FBH_Resolution_Block.jpg
30 FBH Resolution Block 304 Stainless Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
non_destructive_testing_30_FBH_Resolution_Block
30 FBH Resolution Block, 1018 Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__standard_calibration_block
30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 6061 Aluminum Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 7075-T6 Aluminum Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 7075-T6 Aluminum-Metric Version A Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 7075-T6 Aluminum-Metric Version B Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Calibration Block 2024 Aluminum 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block 2024 Aluminum 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block 6061 Aluminum 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Aluminum-7075 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5B 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
8 step block 7075 aluminum metric version ndt calibration block
8 Step Block 7075 Aluminum (Metric Version) Thickness and linearity calibration block This block comes in thicknesses of 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm and 8.0mm. Step Face: 15mm x 15mm
90 curved 5 step block 1018 steel inch version ndt ut calibration block
90° Curved 5-Step Block Aluminum (Metric Version) For thickness and linearity calibration of curved surfaces Metric Version: This Metric Curved 5 Step block is machined from a solid 50.8mm diameter bar with step thicknesses of 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. ID radius is a constant 12.7mm / 25.4mm diameter. Metrice Block Curvature: 12.5mm step has a 25.2mm radius,10.0mm step has a 22.7mm radius,7.5mm step has a 20.2mm radius,5.0mm step has a 17.7 radius,2.5mm step has a 15.2mm radius.Metric Step Face: 25mm x 90° arc.
90 curved 5 step block 1018 steel inch version ndt ut calibration block
90° Curved 5-Step Block, Aluminum (Inch Version) For thickness and linearity calibration of curved surfaces. Inch Version: This 90° Curved 5-Step block is machined from a solid 2" diameter bar with step thicknesses of .100", .200", .300", .400" and .500". ID radius is a constant .50" / 1.00" diameter. Inch Block Curvature: 0.500" step has a 1.0" radius,0.400" step has a 0.9" radius,0.300" step has a 0.8" radius,0.200" step has a 0.7" radius,0.100" step has a 0.6" radius.Inch Step Face: 1.000" x 90° arc.
ALUMINUM_SENSITIVITY_TEST_BLOCK
Aluminum Test Block (for Sensitivity) Cracked aluminum block compares sensitivity of different penetrants or sensitivity of new and old penetrants.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½", 7075-T6 Aluminumm Geometry: contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic ½" Block 7075-T6 Aluminum (long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 3" Block 7075-T6 Aluminum contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
10 step block 7075 aluminum metric 10b ndt utg calibration block
10 Step Block 7075 Aluminum (Metric 10B) (7010)

10 Step Block 7075 Aluminum (Metric 10B)

10 Step Calibration Block
The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block 7075 Aluminum (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
10 step block 1018 carbon steel inch version
10 Step Block 7075 Aluminum-(Metric 10A) (7019)

10 Step Block 7075 Aluminum-(Metric 10A)

10 Step Calibration Block
Metric 1 Type:
The Metric 10A- 10 Step Calibration Block has steps starting at 2.0mm to 20.0mm in 2.0mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block 7075 Aluminum-(Metric 10A) 10 Step Calibration Block Metric 1 Type: The Metric 10A- 10 Step Calibration Block has steps starting at 2.0mm to 20.0mm in 2.0mm increments. Metric Step Face: 20mm x 20mm
10 step block 1018 carbon steel inch version
10 Step Block-7075 Aluminum (Inch Version) (7002)

10 Step Block-7075 Aluminum (Inch Version)

10 Step Calibration Block
Inch Version:
3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments
Inch Step Face: 3/4" x 3/4"
10 Step Block-7075 Aluminum (Inch Version) 10 Step Calibration Block Inch Version: 3/4" square steps at thicknesses of 0.100" to 1.000" in .100" increments Inch Step Face: 3/4" x 3/4"
12 hole 15 notch general purpose eddy current bolt hole standard block 7075 t6 aluminum ndt calibration block
12 Hole 15 Notch, General Purpose Eddy Current Bolt Hole Standard Block (7075-T6 Aluminum) (7374)

12 Hole 15 Notch General Purpose Eddy Current Bolt Hole Standard Block (7075-T6 Aluminum)

12 Hole 15 Notch, General Purpose Eddy Current Bolt Hole Standard Block
Geometry: Block Sizes: 0.25" thick x 2.5" x 6.0"
Holes: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4" diameter
Surface Notches: Qty 3 @ .008", .020" and .040" deep x 1.0" long
Notch Width (All): .004" (± .001)
Hole Notch Configurations:
(1) .030" x .030" (45°) corner notch @ .004" wide in each hole (Qty 12)
(1) .020" full-bore (thru) notch @ .004" wide in each hole - (Qty 12)
(1) Full-bore (thru) notch @ .020" deep x .004" wide and (1) .030" x .030" (45°) corner notch @ .004" in each hole, 180° apart (Qty 24)
(1) Mid-bore notch @ .030" deep x .004" wide x .060" long in each hole - (Qty 12)
Geometry: Block Sizes: 0.25" thick x 2.5" x 6.0" Holes: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8" and 3/4" diameter Surface Notches: Qty 3 @ .008", .020" and .040" deep x 1.0" long Notch Width (All): .004" (± .001) Hole Notch Configurations: (1) .030" x .030" (45°) corner notch @ .004" wide in each hole (Qty 12) (1) .020" full-bore (thru) notch @ .004" wide in each hole - (Qty 12) (1) Full-bore (thru) notch @ .020" deep x .004" wide and (1) .030" x .030" (45°) corner notch @ .004" in each hole, 180° apart (Qty 24) (1) Mid-bore notch @ .030" deep x .004" wide x .060" long in each hole - (Qty 12)
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3 Notch, Eddy Current Standard Block, (7075-T6 Aluminum) NDT ET Calibration Block (7387)

3-Notch Eddy Current Standard Block (7075-T6 Aluminum)


Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.
Dimensions: .250" x 1.0" x 3.0"
3-Notch Eddy Current Standard Block (7075-T6 Aluminum) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (2024-T3 Aluminum) NDT ET Calibration Block (7379)

3-Notch Eddy Current Standard Block 2024-T3 Aluminum

3 Notch Eddy Current Standard Block 2024 T3 Aluminum
Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.
Dimensions: .250" x 1.0" x 3.0"
3-Notch Eddy Current Standard Block (2024-T3 Aluminum) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
3 notch eddy current standard block 7075 t6 aluminum ndt et calibration block
3-Notch Eddy Current Standard Block (2214-T6 Aluminum) NDT ET Calibration Block (7380)

3-Notch Eddy Current Standard Block (2214-T6 Aluminum)

Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible.
Dimensions: .250" x 1.0" x 3.0"
3-Notch Eddy Current Standard Block (2214-T6 Aluminum) Geometry:contains (3) surface notches at depths of .008", .020", and .040". Notch width typically .004" to .005", with other widths possible. Dimensions: .250" x 1.0" x 3.0"
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Block 1018 Steel (Inch Version) (7021)

30 FBH Resolution Block 1018 Steel (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 1018 Steel (Inch Version)
30 FBH Resolution Block 1018 Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ndt_30_FBH_Resolution_Block
30 FBH Resolution Block 304 Stainless Steel (Inch Version) (7023)

30 FBH Resolution Block 304 Stainless Steel (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from Type 304 stainless steel.
30 FBH Resolution Block 304 Stainless Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
30_FBH_Resolution_Block.jpg
30 FBH Resolution Block 304 Stainless Steel (Metric Version) (7024)

30 FBH Resolution Block 304 Stainless Steel (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. In accordance with ASTM E428.
• Metric version
• 38mm x 100mm x 280mm
• 1.2mm, 2.0mm, 3.2mm FBH diameters
• Made from Type 304 Stainless Steel.
30 FBH Resolution Block 304 Stainless Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
non_destructive_testing_30_FBH_Resolution_Block
30 FBH Resolution Block, 1018 Steel (Metric Version) (7022)

30 FBH Resolution Block, 1018 Steel (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. In accordance with ASTM E428.
• Metric version
• 38mm x 100mm x 280mm
• 1.2mm, 2.0mm, 3.2mm FBH diameters
• Made from 1018 Steel (Metric Version)
30 FBH Resolution Block, 1018 Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__standard_calibration_block
30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version) (7026)

30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 7075-T6 Aluminum
30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) (7025)

30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 7075-T6 aluminum, (Inch Version)
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 6061 Aluminum Block (7032)

4 Step Block 6061 Aluminum Block


4-Step Calibration Block for thickness and linearity calibration

Inch Version:
0.750" square with thicknesses of steps at .250", .500", .750" and 1.000".

Metric Versions:
Metric 4A (6.25, 12.5, 18.75 and 25 mm)
Metric 4B (5.0, 10.0, 15.0 and 20 mm)

Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 Step Block 6061 Aluminum Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 7075-T6 Aluminum Block (7033)

4 Step Block 7075-T6 Aluminum Block


4-Step Calibration Block for thickness and linearity calibration

Inch Version:
0.750" square with thicknesses of steps at .250", .500", .750" and 1.000".

Metric Versions:
Metric 4A (6.25, 12.5, 18.75 and 25 mm)
Metric 4B (5.0, 10.0, 15.0 and 20 mm)

Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 Step Block 7075-T6 Aluminum Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 7075-T6 Aluminum-Metric Version A Block (7034)

4 Step Block 7075-T6 Aluminum-Metric Version A Block


4-Step Calibration Block for thickness and linearity calibration

Inch Version:
0.750" square with thicknesses of steps at .250", .500", .750" and 1.000".

Metric Versions:
Metric 4A (6.25, 12.5, 18.75 and 25 mm)
Metric 4B (5.0, 10.0, 15.0 and 20 mm)

Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 Step Block 7075-T6 Aluminum-Metric Version A Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Block 7075-T6 Aluminum-Metric Version B Block (7035)

4 Step Block 7075-T6 Aluminum-Metric Version B Block


4-Step Calibration Block for thickness and linearity calibration

Inch Version:
0.750" square with thicknesses of steps at .250", .500", .750" and 1.000".

Metric Versions:
Metric 4A (6.25, 12.5, 18.75 and 25 mm)
Metric 4B (5.0, 10.0, 15.0 and 20 mm)

Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 Step Block 7075-T6 Aluminum-Metric Version B Block 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 step calibration block 1018 carbon steel ndt calibration block
4 Step Calibration Block 2024 Aluminum (7047)

4 Step Calibration Block 2024 Aluminum


4-Step Calibration Block for thickness and linearity calibration

Inch Version:
0.750" square with thicknesses of steps at .250", .500", .750" and 1.000".

Metric Versions:
Metric 4A (6.25, 12.5, 18.75 and 25 mm)
Metric 4B (5.0, 10.0, 15.0 and 20 mm)

Step Face: 3/4" x 3/4"-Spec: ASTM E797
4 Step Calibration Block 2024 Aluminum 4-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .250", .500", .750" and 1.000". Metric Versions: Metric 4A (6.25, 12.5, 18.75 and 25 mm) Metric 4B (5.0, 10.0, 15.0 and 20 mm) Step Face: 3/4" x 3/4"-Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block 2024 Aluminum (7050)

5 Step Calibration Block 2024 Aluminum

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block 2024 Aluminum 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block 6061 Aluminum (7052)

5 Step Calibration Block 6061 Aluminum


5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block 6061 Aluminum 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5 Step Calibration Block Aluminum-7075 (7054)

5 Step Calibration Block Aluminum-7075

5-Step Calibration Block for thickness and linearity calibration
Inch Version:
0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500".
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5 Step Calibration Block Aluminum-7075 5-Step Calibration Block for thickness and linearity calibration Inch Version: 0.750" square with thicknesses of steps at .100", .200", .300", .400" and .500". Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5A (7065)

5-Step Block Aluminum 7075-T6-Metric 5A

5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5-Step Block Aluminum 7075-T6-Metric 5A 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5A (2.5, 5.0, 7.5, 10.0 and 12.5mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
5 step block carbon steel 1018 ndt calibration block
5-Step Block Aluminum 7075-T6-Metric 5B (7066)

5-Step Block Aluminum 7075-T6-Metric 5B


5-Step Calibration Block for thickness and linearity calibration
Metric Versions:
Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm)
Step Face: 3/4" x 3/4"
Spec: ASTM E797
5-Step Block Aluminum 7075-T6-Metric 5B 5-Step Calibration Block for thickness and linearity calibration Metric Versions: Metric 5B (2.0, 4.0, 6.0, 8.0 and 10.0 mm) Step Face: 3/4" x 3/4" Spec: ASTM E797
8 step block 7075 aluminum metric version ndt calibration block
8 Step, Block 7075 Aluminum (Metric Version) (7071)

8 Step Block 7075 Aluminum (Metric Version)

Thickness and linearity calibration block
This block comes in thicknesses of 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm and 8.0mm.
Step Face: 15mm x 15mm
8 Step Block 7075 Aluminum (Metric Version) Thickness and linearity calibration block This block comes in thicknesses of 1.0mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm and 8.0mm. Step Face: 15mm x 15mm
90 curved 5 step block 1018 steel inch version ndt ut calibration block
90° Curved 5-Step Block Aluminum (Metric Version) (7076)

90° Curved 5-Step Block Aluminum (Metric Version)

For thickness and linearity calibration of curved surfaces
Metric Version:
This Metric Curved 5 Step block is machined from a solid 50.8mm diameter bar with step thicknesses of 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. ID radius is a constant 12.7mm / 25.4mm diameter.
Metrice Block Curvature:
12.5mm step has a 25.2mm radius,10.0mm step has a 22.7mm radius,7.5mm step has a 20.2mm radius,5.0mm step has a 17.7 radius,2.5mm step has a 15.2mm radius. Metric Step Face: 25mm x 90° arc.
90° Curved 5-Step Block Aluminum (Metric Version) For thickness and linearity calibration of curved surfaces Metric Version: This Metric Curved 5 Step block is machined from a solid 50.8mm diameter bar with step thicknesses of 2.5mm, 5.0mm, 7.5mm, 10.0mm and 12.5mm. ID radius is a constant 12.7mm / 25.4mm diameter. Metrice Block Curvature: 12.5mm step has a 25.2mm radius,10.0mm step has a 22.7mm radius,7.5mm step has a 20.2mm radius,5.0mm step has a 17.7 radius,2.5mm step has a 15.2mm radius.Metric Step Face: 25mm x 90° arc.
90 curved 5 step block 1018 steel inch version ndt ut calibration block
90° Curved 5-Step Block, Aluminum (Inch Version) (7078)

90° Curved 5-Step Block, Aluminum (Inch Version)

For thickness and linearity calibration of curved surfaces.
Inch Version:
This 90° Curved 5-Step block is machined from a solid 2" diameter bar with step thicknesses of .100", .200", .300", .400" and .500". ID radius is a constant .50" / 1.00" diameter.
Inch Block Curvature:
0.500" step has a 1.0" radius,0.400" step has a 0.9" radius,0.300" step has a 0.8" radius,0.200" step has a 0.7" radius,0.100" step has a 0.6" radius.Inch Step Face: 1.000" x 90° arc.
90° Curved 5-Step Block, Aluminum (Inch Version) For thickness and linearity calibration of curved surfaces. Inch Version: This 90° Curved 5-Step block is machined from a solid 2" diameter bar with step thicknesses of .100", .200", .300", .400" and .500". ID radius is a constant .50" / 1.00" diameter. Inch Block Curvature: 0.500" step has a 1.0" radius,0.400" step has a 0.9" radius,0.300" step has a 0.8" radius,0.200" step has a 0.7" radius,0.100" step has a 0.6" radius.Inch Step Face: 1.000" x 90° arc.
ALUMINUM_SENSITIVITY_TEST_BLOCK
Aluminum Test Block (for Sensitivity)

Aluminum Test Block (for Sensitivity)

Cracked aluminum block compares sensitivity of different penetrants or sensitivity of new and old penetrants.
Aluminum Test Block (for Sensitivity) Cracked aluminum block compares sensitivity of different penetrants or sensitivity of new and old penetrants.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Cal Block, ½", 7075-T6 Aluminum NDT Calibration Block (7279)

ASME Basic Cal Block, ½", 7075-T6 Aluminum

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 4½" long
  • Material: 7075-T6 Aluminum
ASME Basic Cal Block, ½", 7075-T6 Aluminumm Geometry: contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic cal ½" Block 7075-T6 Aluminum (long version) NDT Calibration Block (7280)

ASME Basic cal ½" Block 7075-T6 Aluminum (long version)

Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: ½" thick x 6¼" wide x 6" long
  • Material: 7075-T6 Aluminum
ASME Basic ½" Block 7075-T6 Aluminum (long version) Geometry: long version for 60/70° transducers or phased array. The additional length allows for a full skip to the "top" notch. Used for establishment of primary reference responses for UT examination of welds. Block contains three side-drilled holes at 1.5" deep minimum at 3/32" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
asme basic block 304 stainless steel ndt calibration block
ASME Basic Calibration 3" Block 7075-T6 Aluminum (7269)

ASME Basic Calibration 3" Block 7075-T6 Aluminum

contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.

ASME Basic Calibration Blocks are intended to be representative of actual components, and therefore do not have the smooth scanning surfaces found on most general-purpose test blocks like the IIW or DSC. Instead, our Basic Calibration Blocks are media blasted on all surfaces to create a rough surface texture that is more characteristic of real-world inspection conditions.
  • Dimensions: 3" thick x 6¼" wide x 9"
  • Material: 7075-T6 Aluminum
ASME Basic Calibration 3" Block 7075-T6 Aluminum contains three side-drilled holes at 1.5" deep minimum at 3/16" diameter. Hole locations through the thickness are ¼, ½, and ¾T. Also contains two EDM notches measuring 2%T deep x 1/4" max wide x 1.0" long min. In accordance with ASME Sec V Art. 4 Fig. T-434.2.1.
Per Page      1 - 30 of 111