Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Block 1018 Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ndt_30_FBH_Resolution_Block
30 FBH Resolution Block 304 Stainless Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
30_FBH_Resolution_Block.jpg
30 FBH Resolution Block 304 Stainless Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
non_destructive_testing_30_FBH_Resolution_Block
30 FBH Resolution Block, 1018 Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
paut phased array calibration block aluminum 7075 t6 1 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Block 1018 Steel (Inch Version) (7021)

30 FBH Resolution Block 1018 Steel (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 1018 Steel (Inch Version)
30 FBH Resolution Block 1018 Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ndt_30_FBH_Resolution_Block
30 FBH Resolution Block 304 Stainless Steel (Inch Version) (7023)

30 FBH Resolution Block 304 Stainless Steel (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from Type 304 stainless steel.
30 FBH Resolution Block 304 Stainless Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
30_FBH_Resolution_Block.jpg
30 FBH Resolution Block 304 Stainless Steel (Metric Version) (7024)

30 FBH Resolution Block 304 Stainless Steel (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. In accordance with ASTM E428.
• Metric version
• 38mm x 100mm x 280mm
• 1.2mm, 2.0mm, 3.2mm FBH diameters
• Made from Type 304 Stainless Steel.
30 FBH Resolution Block 304 Stainless Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
non_destructive_testing_30_FBH_Resolution_Block
30 FBH Resolution Block, 1018 Steel (Metric Version) (7022)

30 FBH Resolution Block, 1018 Steel (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. In accordance with ASTM E428.
• Metric version
• 38mm x 100mm x 280mm
• 1.2mm, 2.0mm, 3.2mm FBH diameters
• Made from 1018 Steel (Metric Version)
30 FBH Resolution Block, 1018 Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) (7025)

30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 7075-T6 aluminum, (Inch Version)
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION (7455)

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION 
Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles
3 No’s Cupro-Nickel bundles for training
3 No’s Aluminum Brass bundles for training
6 No’s Cupro-Nickel bundles for examinations
6No’s Aluminum Brass bundles for examinations
Materials:
1. Amplitude analysis test – 70/30 cupro-nickel of the following composition.
Cu 66%; Ni 30%; Fe 2%; Mn 2%
2. Phase analysis test – Brass tubing of the following composition.
Cu 76%; Al 2%; As 0.04%; Zn reminder
Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
paut phased array calibration block aluminum 7075 t6 1 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) NDT PAUT Calibration Block (7448)
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
PAUT-Phased Array calibration block 1018 Steel (1½" Thick,) ASME Sec V Art 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. The block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 1/4T, 1/2T, and 3/4T. It also contains two EDM notches at 2% deep x .010" wide x 1.500" long on opposite surfaces of one end. Dimensions: 1.50" thick x 1.50" wide x 17.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) NDT PAUT Calibration Block (7451)

PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
PAUT-Phased Array calibration block 1018 Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) NDT PAUT Calibration Block (7452)

PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
PAUT-Phased Array calibration block 304 Stainless Steel (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long
paut phased array calibration block aluminum 7075 t6 no2 34 thick ndt paut calibration block
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2-3/4" Thick) NDT PAUT Calibration Block (7453)

PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick)

ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
PAUT-Phased Array calibration block Aluminum 7075-T6 (No.2 - 3/4" Thick) ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2T and 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.Dimensions: .750" thick x 1.500" wide x 14.00" long.
Per Page      1 - 10 of 10
  • 1