Search

Search Criteria

 
 
 
 

Products meeting the search criteria

Sort By:  
10 step block 1018 carbon steel inch version
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Block 1018 Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ndt_30_FBH_Resolution_Block
30 FBH Resolution Block 304 Stainless Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
30_FBH_Resolution_Block.jpg
30 FBH Resolution Block 304 Stainless Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
non_destructive_testing_30_FBH_Resolution_Block
30 FBH Resolution Block, 1018 Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__standard_calibration_block
30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block 1018 Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
10 step block 1018 carbon steel inch version
10 Step, Block, Titanium, (Metric 10B) (7018)

10 Step Block Titanium (Metric 10B)

10 Step Calibration Block
The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments.
Metric Step Face: 20mm x 20mm
10 Step Block Titanium (Metric 10B) 10 Step Calibration Block The Metric 10B 10 Step Calibration Block has steps starting at 2.5mm to 25.0mm in 2.5mm increments. Metric Step Face: 20mm x 20mm
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Block 1018 Steel (Inch Version) (7021)

30 FBH Resolution Block 1018 Steel (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 1018 Steel (Inch Version)
30 FBH Resolution Block 1018 Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ndt_30_FBH_Resolution_Block
30 FBH Resolution Block 304 Stainless Steel (Inch Version) (7023)

30 FBH Resolution Block 304 Stainless Steel (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from Type 304 stainless steel.
30 FBH Resolution Block 304 Stainless Steel (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
30_FBH_Resolution_Block.jpg
30 FBH Resolution Block 304 Stainless Steel (Metric Version) (7024)

30 FBH Resolution Block 304 Stainless Steel (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. In accordance with ASTM E428.
• Metric version
• 38mm x 100mm x 280mm
• 1.2mm, 2.0mm, 3.2mm FBH diameters
• Made from Type 304 Stainless Steel.
30 FBH Resolution Block 304 Stainless Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
non_destructive_testing_30_FBH_Resolution_Block
30 FBH Resolution Block, 1018 Steel (Metric Version) (7022)

30 FBH Resolution Block, 1018 Steel (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. In accordance with ASTM E428.
• Metric version
• 38mm x 100mm x 280mm
• 1.2mm, 2.0mm, 3.2mm FBH diameters
• Made from 1018 Steel (Metric Version)
30 FBH Resolution Block, 1018 Steel (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__standard_calibration_block
30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version) (7026)

30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E428.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 7075-T6 Aluminum
30 FBH Resolution Block, 7075-T6 Aluminum (Metric Version) Geometry: • 38mm x 100mm x 280mm ,1.2mm, 2.0mm, 3.2mm FBH diameters.
30_FBH_Resolution__Calibraation_block
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) (7025)

30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version)

Used for determining resolution and sensitivity capabilities and for producing area amplitude and distance amplitude plots for normal beam transducers. Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127.
• Dimensions: 11.000" x 4.000" x 1.500"
• Made from 7075-T6 aluminum, (Inch Version)
30 FBH Resolution Blocks 7075-T6 Aluminum (Inch Version) Geometry: Contains ten flat-bottom holes at 3/64” diameter, ten at 5/64”, and ten at 8/64”. Metal travel distances range from .050” to 1.250”. In accordance with ASTM E127. Dimensions: 11.000" x 4.000" x 1.500".
ASTM E317, Block, Figure 1, 7075-T6 Aluminum (Inch Version) (7103)

ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version)

Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
In accordance with ASTM E317 Figure 1.
ASTM E317 horizontal and vertical linearity block, Figure 1 is used for evaluating the horizontal and vertical linearity characteristics of ultrasonic pulse-echo systems.
ASTM E317 Block Figure 1 7075-T6 Aluminum (Inch Version) Geometry: ontains two 3/64" diameter side-drilled holes.Dimensions: 3.00" x 2.00" x 1.00"
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION (7455)

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION 
Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles
3 No’s Cupro-Nickel bundles for training
3 No’s Aluminum Brass bundles for training
6 No’s Cupro-Nickel bundles for examinations
6No’s Aluminum Brass bundles for examinations
Materials:
1. Amplitude analysis test – 70/30 cupro-nickel of the following composition.
Cu 66%; Ni 30%; Fe 2%; Mn 2%
2. Phase analysis test – Brass tubing of the following composition.
Cu 76%; Al 2%; As 0.04%; Zn reminder
Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
edm slot sizing block 7075 t6 aluminum
EDM Slot Sizing, Block, 304 Stainless Steel (7152)

EDM Slot Sizing Block 304 Stainless Steel

Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block.
Dimensions: 1.000" x 1.000" x 10.000".
EDM Slot Sizing Block 304 Stainless Steel Geometry: contains nine EDM slots from 0.100" to 0.900" deep. Slot width is 0.011". Nominal depth is laser engraved on the side of the block. Dimensions: 1.000" x 1.000" x 10.000".
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675 Block, 304 Stainless Steel (Metric Version) (7416)

PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 304 Stainless Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW ISO 19675, Block 7075-T6 Aluminum (Metric Version) (7417)

PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 7075-T6 Aluminum (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
paut iiw iso 19675 block 1018 steel metric version ndt paut calibration block
PAUT IIW, ISO 19675, Block, 1018 Steel (Metric Version) NDT PAUT Calibration Block (7415)

PAUT IIW ISO 19675 Block 1018 Steel (Metric Version)

Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii
The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
PAUT IIW ISO 19675 Block 1018 Steel (Metric Version) Geometry:25mm wide x 100mm tall x 300mm long, with 100mm and 50mm radii The PAUT IIW Block, made in accordance with ISO 19675 was designed by an international committee of NDT experts with the express purpose of creating a globally accepted, standardized block for Phased Array Ultrasonic calibrations. Before the development of this spec, there were no international standards describing a specific block for calibrating PAUT systems.
Per Page      1 - 13 of 13
  • 1