Navships Test NDT Calibration Blocks
NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our Navships Test Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Navships Test Block 1018 Steel (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
Navships Test Block 304 Stainless Steel (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Navships Test Block 304 Stainless Steel (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
Navships Test Block 7075-T6 Aluminum (Metric Version)
Geometry: CContains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments.
Navships Test Block 7075-T6 Aluminum (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
Navships Test Block 7075-T6 Aluminum (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Navships Test Block 1018 Steel (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Navships Test Block 1018 Steel (Navy Version 3020) (7202)
In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 1018 Steel (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 1018 Steel (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
Navships Test Block 304 Stainless Steel (inch Version) (7203)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance withMIL-STD -271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.
Navships Test Block 304 Stainless Steel (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance with
Navships Test Block 304 Stainless Steel (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Navships Test Block 304 Stainless Steel (Navy Version 3020) (7204)
In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 304 Stainless Steel (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 304 Stainless Steel (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
Navships Test Block 7075-T6 Aluminum (Metric Version) (7206)
Geometry:CContains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments. Used for distance amplitude correction, sensitivity levels and flaw depth information. In accordance with Metric equivalent of U.S. customary block, based on MIL-STD -271G Figure 9 and NAVSHIPS Specification 0900-006-3010/Section 6.
Navships Test Block 7075-T6 Aluminum (Metric Version)
Geometry:
Navships Test Block 7075-T6 Aluminum (Metric Version)
Geometry: CContains six 1.2mm diameter side-drilled through-holes at distances of 6.25mm to 68.75mm in 6.25mm increments.
Navships Test Block 7075-T6 Aluminum (Navy Version 3020) (7207)
In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 7075-T6 Aluminum (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".In accordance with NAVSEA TECH PUB #T9074-AS-GIB-010/271, Figure 19.
Used for distance amplitude correction, sensitivity levels and flaw depth information.
Navships Test Block 7075-T6 Aluminum (Navy Version 3020)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .250" to 2.750" in .250" increments, and an additional near-surface hole at .125".
Navships Test Block, 7075-T6 Aluminum (inch Version) (7205)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance withMIL-STD -271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.
Navships Test Block 7075-T6 Aluminum (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance with
Navships Test Block 7075-T6 Aluminum (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Navships, Test Block, 1018 Steel (inch Version) (7201)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance withMIL-STD -271G Figure 9, and NAVSHIPS Specification 0900-006-3010/Section 6. Also known as a "Mare Island block.
Navships Test Block 1018 Steel (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
Used for distance amplitude correction, sensitivity levels and flaw depth information.
In accordance with
Navships Test Block 1018 Steel (inch Version)
Geometry: Contains six 3/64" diameter side-drilled through-holes at distances of .25" to 2.75" in .25" increments. MTDs are engraved near both scan edges on one face. Dimensions: 12.000" x 3.000" x 1.250".
- 1