IIW V1 NDT Calibration Blocks

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our IIW V1 Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
NDT_IIW_Type_1_CALIBRATION_BLOCK.jpg
IIW-Type 1 Block 1018 Steel (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
IIW_Type_1_STANDRAD_CALIBRATION_BLOCK.
IIW-Type 1 Block 1018 Steel (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
NDT_IIW_TYPE_1_BLOCK.jpg
IIW-Type 1 Block 304 Stainless Steel (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
NDT_IIW_V1_STANDRAD_BLOCKS.jpg
IIW-Type 1 Block 304 Stainless Steel (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
IIW_Type_1_STANDRAD_CALIBRATION_BLOCK.
IIW-Type 1 Block 7075-T6 Aluminum (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
NDT_IIW_V1_CALIBRATION_BLOCKS.jpg
IIW-Type 1 Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
ULTRASONIC_IIW_Type_1_STANDRAD_CALIBRATION_BLOCK.jpg
IIW-Type 1 Block Titanium (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
NDT_IIW_V1_CALIBRATION_BLOCKS.jpg
IIW-Type 1 Block, Titanium (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
NDT_IIW_Type_1_CALIBRATION_BLOCK.jpg
IIW-Type 1 Block 1018 Steel (inch Version) (7162)

IIW-Type 1 Block 1018 Steel (inch Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking.  In accordance with:  IIW (International Institute of Welding) and ASTM E164, U.S. Customary Block. 
  • Dimensions:  1.0" x 4.0" x 12.0"
  • Features:   4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide.
  • Alloy:  1018 Steel, Nickel-plated
IIW-Type 1 Block 1018 Steel (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
IIW_Type_1_STANDRAD_CALIBRATION_BLOCK.
IIW-Type 1 Block 1018 Steel (Metric Version) (7163)

IIW-Type 1 Block 1018 Steel (Metric Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.

  • Dimensions:  25.0 mm x 100.0 mm x 300.0 mm
  • Features:   100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
  • Alloy: 1018 Steel (Metric Version)
  • Alloy:  NDE FLAW specializes in custom blocks, and all of our test blocks are available in special and exotic alloys. Please contact us for a quote. We can machine blocks in Titanium alloys, Inconels and other Nickel alloys, Alloy Steels, Stainless Steels, Aluminum, Copper-Nickels, Brasses, Cast Irons, refractory alloys such as Molybdenum and Tungsten, and many more. Let us build your next special alloy test block!
IIW-Type 1 Block 1018 Steel (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
NDT_IIW_TYPE_1_BLOCK.jpg
IIW-Type 1 Block 304 Stainless Steel (inch Version) (7164)

IIW-Type 1 Block 304 Stainless Steel (inch Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking.  In accordance with:  IIW (International Institute of Welding) and ASTM E164, U.S. Customary Block. 
  • Dimensions:  1.0" x 4.0" x 12.0"
  • Features:   4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide.
  • Alloy:  Type 304 Stainless Steel
IIW-Type 1 Block 304 Stainless Steel (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
NDT_IIW_V1_STANDRAD_BLOCKS.jpg
IIW-Type 1 Block 304 Stainless Steel (Metric Version) (7165)

IIW-Type 1 Block 304 Stainless Steel (Metric Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.
  • Dimensions:  25.0 mm x 100.0 mm x 300.0 mm
  • Features:   100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
  • Alloy:  Type 304 Stainless Steel
IIW-Type 1 Block 304 Stainless Steel (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
IIW_Type_1_STANDRAD_CALIBRATION_BLOCK.
IIW-Type 1 Block 7075-T6 Aluminum (inch Version) (7166)

IIW-Type 1 Block 7075-T6 Aluminum (inch Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking.  In accordance with:  IIW (International Institute of Welding) and ASTM E164, U.S. Customary Block. 
  • Dimensions:  1.0" x 4.0" x 12.0"
  • Features:   4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide.
  • Alloy: 7075-T6 Aluminum (inch Version)
IIW-Type 1 Block 7075-T6 Aluminum (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
NDT_IIW_V1_CALIBRATION_BLOCKS.jpg
IIW-Type 1 Block 7075-T6 Aluminum (Metric Version) (7167)

IIW-Type 1 Block 7075-T6 Aluminum (Metric Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.
  • Dimensions:  25.0 mm x 100.0 mm x 300.0 mm
  • Features:   100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
  • Alloy: 7075-T6 Aluminum (Metric Version)
IIW-Type 1 Block 7075-T6 Aluminum (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
ULTRASONIC_IIW_Type_1_STANDRAD_CALIBRATION_BLOCK.jpg
IIW-Type 1 Block Titanium (Metric Version) (7169)

IIW-Type 1 Block Titanium (Metric Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking. In accordance with: IIW (International Institute of Welding) and ASTM E164, Metric Block.
  • Dimensions:  25.0 mm x 100.0 mm x 300.0 mm
  • Features:   100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide.
  • Alloy: Titanium (Metric Version)
IIW-Type 1 Block Titanium (Metric Version) Geometry:100.0 mm radius, 1.5 mm dia hole, 6.0 mm deep x 2.0 mm wide slot, and 25.0 mm radiussed slot x 1.5 mm deep x 3.0 mm wide. Dimensions: 25.0 mm x 100.0 mm x 300.0 mm
NDT_IIW_V1_CALIBRATION_BLOCKS.jpg
IIW-Type 1 Block, Titanium (inch Version) (7168)

IIW-Type 1 Block, Titanium (inch Version)


Used for calibration of shear and longitudinal transducers, and verification of shear wedge exit point and refracted angle. Can also be used for resolution and sensitivity checking.  In accordance with:  IIW (International Institute of Welding) and ASTM E164, U.S. Customary Block. 
  • Dimensions:  1.0" x 4.0" x 12.0"
  • Features:   4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide.
  • Alloy: Titanium (inch Version)
IIW-Type 1 Block, Titanium (inch Version) Geometry:4.0" radius, 2.0" and .060" diameter hole, .240" deep x .080" wide slot, and 1.0" radiussed slot x .060" deep x .120" wide. Dimensions: 1.0" x 4.0" x 12.0"
Per Page      1 - 9 of 9
  • 1