EDDY CURRENT TUBE STANDARDS

 
Calibration Standards for tube inspections

Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures
and implement standards that increase your probability of detection during inspection of plants worldwide.
A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers.
Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support.
We specialize in custom eddy current tubes,

  1. Eddy Current Tube Standards. Ready to request a quote for a standard?
  2. What is the material? (Alloy, OD, and Wall)
  3. Is there any specification, the standard needs to comply with? (ASME, etc.)

And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and
ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,

Sort By:  
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
eddy current tube standard ect
Eddy Current Tube Standard ECT Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
eddy current tube standards ndt calibration block
Eddy Current Tube Standards Block Ready to request a quote for a standard? What is the material? Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? Is there a specification the standard needs to comply with? If you have a drawing, or even a simple hand sketch?
eddy current tube standard iris
Internal Rotary Inspection System Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
eddy current tube standard mfl
Magnetic Flux Leakage Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
eddy current tube standard rft
Remote Field Testing Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
EDDY_CURRENT_TUBE_BUNDLE_SPECIMENS
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION (7455)

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION

EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION 
Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles
3 No’s Cupro-Nickel bundles for training
3 No’s Aluminum Brass bundles for training
6 No’s Cupro-Nickel bundles for examinations
6No’s Aluminum Brass bundles for examinations
Materials:
1. Amplitude analysis test – 70/30 cupro-nickel of the following composition.
Cu 66%; Ni 30%; Fe 2%; Mn 2%
2. Phase analysis test – Brass tubing of the following composition.
Cu 76%; Al 2%; As 0.04%; Zn reminder
Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
EDDY CURRENT TUBE BUNDLE SPECIMENS FOR PCN CLASSIFICATION Tubes in each bundle is 13 No’s, For training 6 bundle’s, For examinations 12 bundle’s, total 18 bundles 3 No’s Cupro-Nickel bundles for training 3 No’s Aluminum Brass bundles for training 6 No’s Cupro-Nickel bundles for examinations 6No’s Aluminum Brass bundles for examinations Materials: 1. Amplitude analysis test – 70/30 cupro-nickel of the following composition. Cu 66%; Ni 30%; Fe 2%; Mn 2% 2. Phase analysis test – Brass tubing of the following composition. Cu 76%; Al 2%; As 0.04%; Zn reminder Tube Dimensions, Length Thickness Outer Diameter And Artificial Flaws as per PCN Requirements.
eddy current tube standard ect
Eddy Current Tube Standard ECT

Eddy Current Tube Standard ECT

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

ECT

Comments

Condensers

Nonferromagnetic material Generally, thin tubes made of brass, aluminum brass, cupronickel, or titanium.

X

– ECT is the recommended choice for its speed and its accuracy.

Air Conditioners

Copper with low profile OD fins Typical problem is circumferential cracking and wear in the land area.

X

– ECT inspection with special probes to detect circumferential cracks.  These probes are normally called AC probes.

Heat Exchangers

Nonferromagnetic material Stainless steel, Cu/Ali

X

– ECT is the recommended choice for its speed and accuracy.- IRIS can sometimes be used to confirm the sizing of ID defects.

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.

Eddy Current Tube Standard ECT Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards For Tube Inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes,Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards For Tube Inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
EDDY CURRENT TUBE STANDARDS Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
EDDY CURRENT TUBE STANDARDS
Calibration Standards for tube inspections Our experience in dealing with all simulated flaws from EDMs notches to thinning and expansions puts us in a unique position to recommend procedures and implement standards that increase your probability of detection during inspection of plants worldwide. A large list of tubing as per ASME standards are available. Also, we can develop customized solutions that meet the specific needs of our customers. Whether you need tube supports, uncommon flaws or specialized packaging for the standards, NDE can support. We specialize in custom eddy current tubes, Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards. Ready to request a quote for a standard? What is the material? (Alloy, OD, and Wall) Is there any specification, the standard needs to comply with? (ASME, etc.) And have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, RBHs, ID contoured flats, 120°/180° wear scars, tapered flaws, and tube-to-tube wear,
eddy current tube standards ndt calibration block
Eddy Current Tube Standards Block (7454)

Eddy Current Tube Standards Block

Ready to request a quote for a standard? Here's what we need...
What is the material? (Alloy, OD and Wall)
Is NDE supplying the material or will it be customer supplied?
What defects are needed and what size? (most depths are given in % of tube wall)
Is there a specification the standard needs to comply with? (ASME, etc.)
If you have a drawing or even a simple hand sketch, please send that along as well.

We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
Eddy Current Tube Standards Block Ready to request a quote for a standard? What is the material? Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? Is there a specification the standard needs to comply with? If you have a drawing, or even a simple hand sketch?
eddy current tube standard iris
Internal Rotary Inspection System Tube

Internal Rotary Inspection System Tube

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

IRIS

Comments

Heat Exchangers

Nonferromagnetic material Stainless steel, Cu/Ali

X

– ECT is the recommended choice for its speed and accuracy.- IRIS can sometimes be used to confirm the sizing of ID defects.

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.

Ferromagnetic material Carbon steel, nickel. Typical defects are pitting and corrosion.

X

– RFT, MFL, and IRIS are good, and most of the time complementary.

Air Coolers

Carbon steel tube with aluminum fins Typical defects are ID pitting and OD wear close to the water box.

X

– RFT is not effective because the fins disturb the remote field.- MFL is quick and sensitive but does not allow sizing.- IRIS is often used to back up MFL but has difficulty with OD flaws.

Boilers

Carbon steel tube Typical defects are pitting, wear, and cracking at the tube sheet.

X

– RFT is good for wear detection and can easily pass the bend.- MFL is good only on straight boiler tubes without swages.- IRIS is good for wear and pits but has no sensitivity in the bend.

Internal Rotary Inspection System Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
eddy current tube standard mfl
Magnetic Flux Leakage Tube

Magnetic Flux Leakage Tube

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

MFL

Comments

Heat Exchangers

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.

Ferromagnetic material Carbon steel, nickel. Typical defects are pitting and corrosion.

X

– RFT, MFL, and IRIS are good, and most of the time complementary.

Air Coolers

Carbon steel tube with aluminum fins Typical defects are ID pitting and OD wear close to the water box.

X

– RFT is not effective because the fins disturb the remote field.- MFL is quick and sensitive but does not allow sizing.- IRIS is often used to back up MFL but has difficulty with OD flaws.

Boilers

Carbon steel tube Typical defects are pitting, wear, and cracking at the tube sheet.

X

– RFT is good for wear detection and can easily pass the bend.- MFL is good only on straight boiler tubes without swages.- IRIS is good for wear and pits but has no sensitivity in the bend.

Magnetic Flux Leakage Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
eddy current tube standard rft
Remote Field Testing Tube

Remote Field Testing Tube

Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,

Application

Description

RFT

Comments

Heat Exchangers

Mildly ferromagnetic material Duplex steel, SS439, Secure, Monel

X

– ECT is used only for thin tubes (<1.6 mm) with saturation probes.- For thicker walls, it is better to use RFT or MFL.- IRIS can sometimes be used to confirm the sizing of defects.
Ferromagnetic material Carbon steel, nickel. Typical defectsare pitting and corrosion.

X

– RFT, MFL, and IRIS are good, and most of the time complementary.

Boilers

Carbon steel tube Typical defects are pitting, wear, and cracking at the tube sheet.

X

– RFT is good for wear detection and can easily pass the bend.- MFL is good only on straight boiler tubes without swages.- IRIS is good for wear and pits but has no sensitivity in the bend.

Buried Pipes

Carbon steel or cast iron pipes Typical defects are pitting and general corrosion.

X

– RFT is the only effective technique because it does not require cleaning, and it can easily negotiate elbows. However, sensitivity to pitting is limited.
Remote Field Testing Tube Eddy Current Tube Standards. Ready to request a quote for a standard? Here's what we need... What is the material? (Alloy, OD and Wall) Is NDE supplying the material or will it be customer supplied? What defects are needed and what size? (most depths are given in % of tube wall) Is there a specification the standard needs to comply with? (ASME, etc.) If you have a drawing, or even a simple hand sketch, please send that along as well. We specialize in custom eddy current tubes, and have years of experience in machining a huge range of defects. From TWHs and FBHs, OD and ID grooves, milled flats, and OD and ID thinning bands, to ID FBHs, ID contoured flats, 120°/180° wearscars, tapered flaws, and tube-to-tube wear,
Per Page      1 - 13 of 13
  • 1