DS NDT Calibration Block

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our DS Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 304 Stainless Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 7075 Aluminum AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block Titanium AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block, 1018 Carbon Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 304 Stainless Steel (7140)

DS Calibration Block 304 Stainless Steel

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block 304 Stainless Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block 7075 Aluminum (7141)

DS Calibration Block 7075 Aluminum

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block 7075 Aluminum AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block Titanium (7142)

DS Calibration Block Titanium

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements..
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block Titanium AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
ds block 1018 carbon steel ndt ut calibration block
DS Calibration Block, 1018 Carbon Steel (7139)

DS Calibration Block, 1018 Carbon Steel

AWS-type block used for longitudinal distance and sensitivity calibration. Contains a 2.0" high section between two 4.0" sections. In accordance with AWS requirements.
• Dimensions: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
• AWS does not specify a separate metric version of the DS block. The metric block in AWS shows only the metric equivalents to the standard design. Therefore, this one block can be used for both inch and metric requirements.
DS Calibration Block, 1018 Carbon Steel AWS and ANSI Type DS calibration Block Geometry: 6.000" x 4.000" x 2.000" (152.4 mm x 101.6 mm x 50.8 mm)
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
Per Page      1 - 5 of 5
  • 1