Calibration Block No.1 (K1) NDT Calibration Block

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our Calibration Block No.1 (K1) Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
calibration block 7075 t6 aluminum no1 k1 ndt ut calibration block
Calibration Block 1018 Steel No.1 (K1) Geometry:100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
calibration block 7075 t6 aluminum no1 k1 ndt ut calibration block
Calibration Block 304 Stainless Steel No.1 (K1) Geometry:100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
calibration block 7075 t6 aluminum no1 k1 ndt ut calibration block
Calibration Block 7075-T6 Aluminum No.1 (K1) Geometry:100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
calibration block 7075 t6 aluminum no1 k1 ndt ut calibration block
Calibration Block 1018 Steel No.1 (K1) (7117)

Calibration Block 1018 Steel No.1 (K1)


For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. Our version of this block includes a 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. In accordance with EN 12223 and ISO 2400.  

This block is not to be confused with the older style "V1/5 (A2)" Block from BS 2704, which is similar but contains a 1.5mm through-hole rather than a 3.0mm hole. See our test block store for more information on this block.

• Dimensions: 300mm x 100mm x 25mm
Calibration Block 1018 Steel No.1 (K1) Geometry:100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
calibration block 7075 t6 aluminum no1 k1 ndt ut calibration block
Calibration Block 304 Stainless Steel No.1 (K1), NDT UT Calibration Block (7118)

Calibration Block 304 Stainless Steel No.1 (K1)


For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. Our version of this block includes a 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. In accordance with EN 12223 and ISO 2400.  

This block is not to be confused with the older style "V1/5 (A2)" Block from BS 2704, which is similar but contains a 1.5mm through-hole rather than a 3.0mm hole. See our test block store for more information on this block.

• Dimensions: 300mm x 100mm x 25mm
• Made from Type 304 Stainless Steel
Calibration Block 304 Stainless Steel No.1 (K1) Geometry:100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
calibration block 7075 t6 aluminum no1 k1 ndt ut calibration block
Calibration Block, 7075-T6 Aluminum No.1 (K1) NDT UT Calibration Block (7119)

Calibration Block, 7075-T6 Aluminum No.1 (K1)

For calibrating ultrasonic flaw detection equipment in both laboratory and on-site conditions. Our version of this block includes a 100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range. In accordance with EN 12223 and ISO 2400.  

This block is not to be confused with the older style "V1/5 (A2)" Block from BS 2704, which is similar but contains a 1.5mm through-hole rather than a 3.0mm hole. See our test block store for more information on this block.

• Dimensions: 300mm x 100mm x 25mm
• Made from 7075-T6 Aluminum, anodized.
• Fitted wooden storage case optional...see below.
Calibration Block 7075-T6 Aluminum No.1 (K1) Geometry:100mm radius, 3.0mm and 50.0mm holes, engraved reference mark scales, and two optional slots at the zero point which provide calibrating signals at intervals of 100mm range.
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
Per Page      1 - 4 of 4
  • 1