Calibration Block No. 2 (EN 27963) NDT Calibration Blocks

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our Calibration Block No. 2 (EN 27963) Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 1018 Steel (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 25mm 304 Stainless Steel Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 304 Stainless Steel (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 7075-T6 Aluminum (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 7075-T6 Aluminum (25mm) Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 Titanium (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 Titanium (25mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2, 1018 Steel (25mm) Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 1018 Steel (12.5mm) (7120)

Calibration Block No-2 1018 Steel (12.5mm)


Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 1018 Steel (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 25mm 304 Stainless Steel (7122)

Calibration Block No-2 25mm 304 Stainless Steel

Calibration Block No-2 25mm 304 Stainless Steel 
Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 25mm 304 Stainless Steel Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 304 Stainless Steel (12.5mm) (7123)

Calibration Block No-2 304 Stainless Steel (12.5mm)


Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 304 Stainless Steel (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 7075-T6 Aluminum (12.5mm) (7124)

Calibration Block No-2 7075-T6 Aluminum (12.5mm)

Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 7075-T6 Aluminum (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 7075-T6 Aluminum (25mm) (7125)

Calibration Block No-2 7075-T6 Aluminum (25mm)


Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 7075-T6 Aluminum (25mm) Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 Titanium (12.5mm) (7127)

Calibration Block No-2 Titanium (12.5mm)

Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 Titanium (12.5mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2 Titanium (25mm) (7126)

Calibration Block No-2 Titanium (25mm)

Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
12.5mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2 Titanium (25mm) Geometry:25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 12.5mm.
calibration block 2 7075 t6 aluminum 125mm ndt calibration block
Calibration Block No-2, 1018 Steel (25mm) (7121)

Calibration Block No-2, 1018 Steel (25mm)


Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
25mm thick small calibration block for on-site checking of miniature shear wave probe index, time base, beam angle and gain.
In accordance with EN 27963, DIN 54-120, and ISO 7963.
Calibration Block No-2, 1018 Steel (25mm) Geometry: 25mm and 50 mm radius, 5.0mm hole, engraved reference mark scales from 35 to 75 degrees.Dimensions: 75mm x 43mm x 25.0mm.
Per Page      1 - 8 of 8
  • 1