AWS / CWI Training Kit

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our AWS/CWI Training Kit, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
aws d18 annex e structural weld seismic supplement ut testing
AWS D1.8 Annex E for Structural Weld / Seismic Supplement for UT Testing Geometry:1 Set of 8 specimens 2 Butt Welds w/ V Groove (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 8” 2 Butt Welds w/ V Groove w/ Backing Bar, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 8" 2 Tee Welds w/ Single Groove, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 4” Main x 7” Branch 2 Tee Welds w/ Single Groove w/ Backing Bar, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 4” Main x 7” Branch
awscwi visual kit per aws d11
AWS/CWI Visual Kit (As Per AWS D1.1) Geometry:Kit contains 10 specimens: (4) Plates @ .25"T (4) Tee @ .25"T (2) Lap Joints Material: Carbon Steel Documentation: NDT Verification Reports,C of C, CAD Drawings and Test Sheets.
aws d18 annex e structural weld seismic supplement ut testing
AWS D1.8 Annex E for Structural Weld / Seismic Supplement for UT Testing (7290)
AWS D1.8 Annex E for Structural Weld / Seismic Supplement for UT Testing Geometry:1 Set of 8 specimens 2 Butt Welds w/ V Groove (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 8” 2 Butt Welds w/ V Groove w/ Backing Bar, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 8" 2 Tee Welds w/ Single Groove, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 4” Main x 7” Branch 2 Tee Welds w/ Single Groove w/ Backing Bar, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 4” Main x 7” Branch Material: Carbon Steel Documentation: NDT Verification Reports,C of C, CAD Drawings and Test Sheets.
AWS D1.8 Annex E for Structural Weld / Seismic Supplement for UT Testing Geometry:1 Set of 8 specimens 2 Butt Welds w/ V Groove (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 8” 2 Butt Welds w/ V Groove w/ Backing Bar, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 8" 2 Tee Welds w/ Single Groove, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 4” Main x 7” Branch 2 Tee Welds w/ Single Groove w/ Backing Bar, (1) @ 0.375” T and (1) @ 0.75” T each 6” (weld length) x 4” Main x 7” Branch
awscwi visual kit per aws d11
AWS/CWI Visual Kit (As Per AWS D1.1) (7291)
AWS/CWI Visual Kit (As Per AWS D1.1) Geometry:Kit contains 10 specimens: (4) Plates @ .25"T (4) Tee @ .25"T (2) Lap Joints Material: Carbon Steel Documentation: NDT Verification Reports,C of C, CAD Drawings and Test Sheets. Kit is desgned specifically for VT weld inspection. Flaws are designed to be "border line" acceptable or rejectable.
AWS/CWI Visual Kit (As Per AWS D1.1) Geometry:Kit contains 10 specimens: (4) Plates @ .25"T (4) Tee @ .25"T (2) Lap Joints Material: Carbon Steel Documentation: NDT Verification Reports,C of C, CAD Drawings and Test Sheets.
Per Page      1 - 2 of 2
  • 1