ASTM E2491 Phased Array Assessment Block NDT Calibration Blocks

NDE offers ASTM E2491 Phased Array Assessment Block in steel, aluminum, stainless steel, Magnesium, Copper and other alloys. Please browse our products to find the best one for you. If you have any questions about NDE and our PAUT & TOFD STANDARD BLOCKS, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Metric Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter. Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes. Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 150mm x 100mm x 25mm
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Metric Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter. Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes. Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 150mm x 100mm x 25mm
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Metric Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter. Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes. Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 150mm x 100mm x 25mm
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT, ASTM E2491, Phased Array Assessment Block 304 Stainless Steel (Inch Version) NDT PAUT Calibration Block (7411)

PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Inch Version)

Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter
Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at .040" diameter with .120" of separation between holes.
Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes.
Machine engraved tick mark at radii centerline.
Dimensions: 1" thick x 4" wide x 6" long.

ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear / angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities.
PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version) NDT PAUT Calibration Block (7409)

PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version)

PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version)
Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter
Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at .040" diameter with .120" of separation between holes.
Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes.
Machine engraved tick mark at radii centerline.
Dimensions: 1" thick x 4" wide x 6" long.

ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear / angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities.
PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Metric Version) NDT PAUT Calibration Block (7410)

PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Metric Version)

PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Metric Version
Geometry: Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter.
Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes.
Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes.
Machine engraved tick mark at radii centerline.
Dimensions: 150mm x 100mm x 25mm

ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear /angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities.
PAUT-ASTM E2491 Phased Array Assessment Block 1018 Steel (Metric Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter. Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes. Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 150mm x 100mm x 25mm
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Metric Version) NDT PAUT Calibration Block (7412)

PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Metric Version)

Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter.
Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes.
Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes.
Machine engraved tick mark at radii centerline.
Dimensions: 150mm x 100mm x 25mm

ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear / angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities.
PAUT-ASTM E2491 Phased Array Assessment Block 304 Stainless Steel (Metric Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter. Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes. Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 150mm x 100mm x 25mm
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Metric Version) (7414)

PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Metric Version)

Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter.
Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes.
Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes.
Machine engraved tick mark at radii centerline.
Dimensions: 150mm x 100mm x 25mm

ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear / angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities.
PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Metric Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1.5mm diameter. Array of 18 holes on 25mm radius at 1.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 50 mm radius at 2.0mm diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at 1.0mm diameter with 3.0mm of separation between the holes. Angled row of 12 holes at 1.5mm diameter with 5.0mm of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 150mm x 100mm x 25mm
paut astm e2491 phased array assessment block aluminum 7075 t6 inch version ndt paut calibration block
PAUT-ASTM E2491 Phased Array Assessment Block, Aluminum 7075-T6 (Inch Version) NDT PAUT Calibration Block (7413)

PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Inch Version)

Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter
Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array.
Vertical column of 16 holes at .040" diameter with .120" of separation between holes.
Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes.
Machine engraved tick mark at radii centerline.
Dimensions: 1" thick x 4" wide x 6" long.

ASTM E2491 Phased Array Assessment Block is a general purpose Phased Array calibration block used for beam characterization and evaluation of system performance characteristics. Use it as a baseline block to determine long-term instrument performance changes, generate DAC curves and evaluate linear / angular resolution, focusing ability and beam steering capabilities. With a variety of targets, this small, lightweight block is also perfect for customer demonstrations of phased array ultrasonics capabilities.
PAUT-ASTM E2491 Phased Array Assessment Block Aluminum 7075-T6 (Inch Version) Geometry:Four (4) angled holes (30°, 45°, 60° and 75°) at 1/16" (.0625) diameter Array of 18 holes on 1" radius at .040" diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Array of 18 holes on 2" radius at 5/64" (.0781) diameter. Angular separation between holes is 5.0°, with 2.5° of separation between the last two holes in the array. Vertical column of 16 holes at .040" diameter with .120" of separation between holes. Angled row of 12 holes at 1/16" (.0625) diameter with .200" of separation between holes. Machine engraved tick mark at radii centerline. Dimensions: 1" thick x 4" wide x 6" long.
Per Page      1 - 6 of 6
  • 1