ASTM Distance/Area Amplitude Set of 10 NDT Calibration Blocks

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our ASTM Distance/Area Amplitude Set of 10 Calibration Blocks, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com. and to know more details about block and specimens log on to  www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10-304 Stainless Steel ASTM E428 Area Amplitude Calibration Blocks, 304 Stainless Steel, Set of 10 Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10-4340 Steel ASTM E428 Area Amplitude Calibration Blocks, 4340 Steel, Set of 10. Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10-7075 Aluminum ASTM E127 Area Amplitude Calibration Blocks, 7075 Aluminum, Set of 10 Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10-Titanium ASTM E428 Area Amplitude Calibration Blocks, Titanium, Set of 10. Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Single Custom Blocks Ready to request a quote for some blocks? Here's what we need... What is the material? What is the FBH diameter? What is the metal travel distance? What is the block diameter/shape? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASTM block design?
dsr calibration block
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10, 304 Stainless Steel Block (7095)

ASTM Distance/Area Amplitude Set of 10, 304 Stainless Steel Block


Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from 304 Stainless Steel.
ASTM Distance/Area Amplitude Set of 10-304 Stainless Steel ASTM E428 Area Amplitude Calibration Blocks, 304 Stainless Steel, Set of 10 Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10-4340 Steel Block (7096)

ASTM Distance/Area Amplitude Set of 10-4340 Steel Block


Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from 4340 Steel.
ASTM Distance/Area Amplitude Set of 10-4340 Steel ASTM E428 Area Amplitude Calibration Blocks, 4340 Steel, Set of 10. Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set of 10-7075 Aluminum Block (7097)

ASTM Distance/Area Amplitude Set of 10-7075 Aluminum Block


Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E127. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from 7075-T6 Aluminum
ASTM Distance/Area Amplitude Set of 10-7075 Aluminum ASTM E127 Area Amplitude Calibration Blocks, 7075 Aluminum, Set of 10 Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distancearea amplitude set 10 7075 aluminum ndt calibration block
ASTM Distance/Area Amplitude Set, of 10-Titanium Block (7098)

ASTM Distance/Area Amplitude Set, of 10-Titanium Block


Basic set of ten flat-bottom hole blocks used to determine dead zone, sensitivity, distance and area amplitude linearity measurements. In accordance with ASTM E428. Includes our NIST traceable dimensional certification report, ultrasonic inspection report and two response plots from Tactic Inc, and the certified material test report. Note that we use a 5.0 MHz quartz transducer for block characterization as required by ASTM E127, Section 11.
• Dimensions: 3/64” at 3.000” MTD; 5/64” at .125”, .250”, .500”, .750”, 1.500”, 3.000” and 6.000” MTD; and 8/64" at 3.000" and 6.000" MTD. Block diameter is 2.0".
• Made from Type Titanium.
ASTM Distance/Area Amplitude Set of 10-Titanium ASTM E428 Area Amplitude Calibration Blocks, Titanium, Set of 10. Geometry:Set of 10 Contains the following hole diameters and metal travel distances: 3/64" - 3.0" (3-0300), 5/64" - .12" (5-0012), 5/64" - .25" (5-0025), 5/64" - .50" (5-0050), 5/64" - .75" (5-0075), 5/64" - 1.5" (5-0150), 5/64" - 3.0" (5-0300), 5/64" - 6.0" (5-0600), 8/64" - 3.0" (8-0300) and 8/64" - 6.0" (8-0600).
astm distance amplitude set 19 4340 steel ndt calibration block
ASTM Single Custom Blocks (7090)

ASTM Single Custom Blocks

Ready to request a quote for some blocks? Here's what we need...
What is the material?
What is the FBH diameter?
What is the metal travel distance?
What is the block diameter/shape?
Is NDE supplying the material or will it be customer supplied?
Are there any changes or modifications requested to the ASTM block design?

blocks are available in exotic alloys, extra small or large diameter FBHs shapes other than the standard 2" diameter round, metric dimensions, concave or convex radius ends, or non-typical quantities of blocks per set. Extra-long blocks up to 40" metal travel distance at 4" diameter are also available.

Flat-bottom hole diameter: 1/64" to 16/64"
Metal Travel Distance: .050" to 40.000".
Material: Most alloys including exotics. Special colored anodizing is available for aluminum blocks.
Used for measurement of the sensitivity and/or resolution of normal beam transducers. In accordance with ASTM E127 (aluminum alloys) or E428 (all other alloys).
ASTM Single Custom Blocks Ready to request a quote for some blocks? Here's what we need... What is the material? What is the FBH diameter? What is the metal travel distance? What is the block diameter/shape? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASTM block design?
dsr calibration block
DSR Calibration Block (7020)

DSR Calibration Block

DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes.
Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.

Features include:
Four step (.250, .500, .750 and 1.000 inch) calibration block for distance calibration
Side drilled holes 0.030" (0.75 mm) diameter drilled with metal-path distance from 0.030" (0.75mm) to 1" (25 mm).
DSR Calibration Block DSR Distance-Sensitivity-Resolution Calibration Block for Dual Probes. Designed to determine near surface resolution of dual thickness gauging probes and verify sensitivity of dual thickness gauges.
Per Page      1 - 6 of 6
  • 1