ASME Angle Beam Calibration Block For Pipe NDT Calibration Blocks

NDE offers calibration blocks and flawed specimens. Please browse our products to find the best one for you. If you have any questions about NDE and our ASME Angle Beam Calibration Block For Pipe, please contact us at +91-9043-660-755 or send an email to info@ndeflawtechnologies.com.and to know more details about block and specimens log on to www.ndtproduct.com Our knowledgeable customer service staff is happy to assist you.
Sort By:  
paut asme type pipe calibration block ndt paut calibration block
ASME Angle Beam Calibration Block For Pipe. Ready to request a quote for some blocks? Here's what we need... What is the pipe material? What is the pipe NPS / OD size? What is the pipe schedule / wall thickness? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASME block design?
paut asme type pipe calibration block ndt paut calibration block
ASME Angle Beam Calibration Block For Pipe. Ready to request a quote for some blocks? Here's what we need... What is the pipe material? What is the pipe NPS / OD size? What is the pipe schedule / wall thickness? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASME block design?
paut asme type pipe calibration block ndt paut calibration block
ASME Angle Beam Calibration Block (7079)

ASME Angle Beam Calibration Block For Pipe


Ready to request a quote for some blocks? Here's what we need...
What is the pipe material?
What is the pipe NPS / OD size?
What is the pipe schedule / wall thickness?
Is NDE supplying the material or will it be customer supplied?
Are there any changes or modifications requested to the ASME block design?

ASME Angle Beam Calibration Blocks contain (4) EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4" max wide (most notches are approximately .020-.030" wide) x 1.000" min long. Blocks 4" NPS and smaller are left at 360°, while blocks over 4" are milled to an 8" arc section. All blocks are 8" in axial length, or 8T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-434.3. In small quantities, blocks can be shipped in approximately 1 week, with rush options always available. Larger quantities will take longer, however we're happy to do partial shipments.
ASME Angle Beam Calibration Block For Pipe. Ready to request a quote for some blocks? Here's what we need... What is the pipe material? What is the pipe NPS / OD size? What is the pipe schedule / wall thickness? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASME block design?
paut asme type pipe calibration block ndt paut calibration block
ASME Angle Beam Calibration Block For Pipe (7079)

ASME Angle Beam Calibration Block For Pipe


Ready to request a quote for some blocks? Here's what we need...
What is the pipe material?
What is the pipe NPS / OD size?
What is the pipe schedule / wall thickness?
Is NDE supplying the material or will it be customer supplied?
Are there any changes or modifications requested to the ASME block design?

ASME Angle Beam Calibration Blocks contain (4) EDM notches (axial and circumferential on both OD and ID) at a depth of 8-11% of nominal wall thickness x 1/4" max wide (most notches are approximately .020-.030" wide) x 1.000" min long. Blocks 4" NPS and smaller are left at 360°, while blocks over 4" are milled to an 8" arc section. All blocks are 8" in axial length, or 8T, whichever is greater. Made in accordance with ASME Section V Article 4 Figure T-434.3. In small quantities, blocks can be shipped in approximately 1 week, with rush options always available. Larger quantities will take longer, however we're happy to do partial shipments.
ASME Angle Beam Calibration Block For Pipe. Ready to request a quote for some blocks? Here's what we need... What is the pipe material? What is the pipe NPS / OD size? What is the pipe schedule / wall thickness? Is NDE supplying the material or will it be customer supplied? Are there any changes or modifications requested to the ASME block design?
Per Page      1 - 2 of 2
  • 1